Leaderboard

@JABIR see these links , and do as i mailed u http://forum.ppcgeeks.com/showthread.php?t=41126 http://www.4shared.com/file/70167212/766511d3/QXDM31136.html?s=1

OK, so I ran into some trouble while loading the unlockers 0.25 and 0.37; it gave me an error[284] : update error in both these exe's; so I had to use the sd cardmethod to flash them as given in ppcgeeks here - http://forum.ppcgeek...ead.php?t=61333 Download the SSPL in zip file attached at ppcgeeks. Extract this and put the exein main memory on your phone. (meaning the SSPL should not be on yourSD card.) Then download the attached zipped up nbh under hardspl 0.25.rar (also from ppcgeeks).Extract it then transfer itto your sd card (not in any folders just onthe root of the sd card.) click on the exe you put on your phone to open up the sspl thenitshould prompt you to push power to flash. Once the flash is doneyouare unlocked. (I think some have hit the unbootable cyclebysoftreseting too soon at this point sometimes it hangs for acoupleminutes while the bar is full but make sure it says completebefore yousoft reset) You can verify by holding power and vol downwhile pressingsoft reset. It should say cmonex if you unlocked properly. NOTE: some users ( read ME) have reported getting stuck in an unbootable loop (notingerror messages about the flash) after this step. simply flash any rom (Iflashed the original Sprint Rom; download it from the link given) andyou should get out of this cycle. below are linkes to the dumped stockroms, I grabbed the links straight out of imcokeman'sthread so makesure you give him thanks if you use them. link to his thread http://forum.ppcgeek...ead.php?t=42741 Now same step has to be repeated in step 18, where u might again getstuck in unbootable loop and have to reflash the original sprint rom;Also the file under hardspl 0.37.rar has to be renamed RAPHIMG.nbh andsame procedure has to be followed. Rest of the steps will remain sameas given in first post of dummies guide.

Your IP range was blocked in the server firewall earlier due to an abusive user from that IP range. I have unblocked it now. You should be able to access now.

^^^ just select relmobileworld as ur connection then enable proxy if u cant get it to work without proxy just put following for proxy proxy address - wapgw.ricinfo.com port- 8080 advanced http:wapgw.ricinfo.com:8080

just added script for soft reset now u dont have to do soft reset after installation is over , ur device will automatically reboot MK-RELIANCE DATA .rar

UPDATE I have repackaged three cab files -MKhtc guardian fix -HPrelmobileworld -HPrelnetconnect into one single installer package all u have to do is copy paste the installer file in the archive to ur device then click on it , it will do a step wise installation of 3 cab files , just follow onscreen instructions once finished just reboot ur device and delete sprint settings so now its just one file to do it all !!! MK- reliance data.rar

OK, so Here's a Step by Step Guide for GENERAL SETTINGS by EPST- First copy the reliance.prl directly to your memory card Then Press Green (Dial) button to enter dialler Press ##778# - you will be able to see EPST Screen now... Press Edit... Enter Unlock code as the 6 digit code you got from BAFMSL... You will enter Main Display Screen and all info will be displayed. Now on this Display Screen edit only 2 fields - Nam Name to Reliance and MSID to your 10 digit MIN number by first selecting then clicking Menu-Edit; Then, Click View Info and then go to NAM Settings. Here you have to edit NAM Name to Reliance, Mobile Directory Number to your 10 digit Reliance Number, Check and confirm that in MSID your 10 digit MIN number is displayed (if not, edit to MIN); MCC to 404, MNC to 00 Then Click View Info again and select CDMA Settings - These should be like as below, otherwise edit them to these figures - A-Sys Primary 283; B-Sys Primary 384; A-Sys Secondary 691; B-Sys Secondary 777; MOB_TERM_FOR_HOM /SID/NID - All should be Enable; Home Page/Home Orig, Roam Orig - all should be EVRC Then Click View Info again and select Home SID/Home NID - Edit the first field i.e. Home SID/NID #1 to 14655 / 65535 Then Click View Info again and select Modem Settings - Slot Cycle Index is 2 (but you can edit it to 1 for faster tower catching, your choice); Preferred Serving Syste / Preferred Mode- both should be Automatic; dont touch anything else... Then Click View Info again and select PRL - Click Update PRL File - Menu - Edit - Browse - It will be able to see and search the reliance.prl on your memory card - select it - Press OK; so your prl is now updated Then Click View Info again and select M.IP Settings - edit MIP_MODE and change iit to Simple IP Only Finally click Menu - OK and then update your settings and phone will reboot... Now say CHEERS... AND START CALLING...

well firstly the device the guy is talking about is simply a sim card reader with one particualr s/w rather check for cheaper chinese sim card readers and u can get s/ws for free which can read data stored in sim card , u just need to search u dont have to pay 150$ or buy oxygen manager forensics also dont hype abt customs or duties there will hardly be any customs or duties on these sim readers