Jump to content
Reliance Jio & Reliance Mobile Discussion Forums

Avichal123

Members
 View Profile  See their activity

  • Content count

    16

  • Joined

  • Last visited

Posts posted by Avichal123

  2. Posted · Report reply

    Finally I Dont know how but after selecting Charge Only and disabling enabling USB Debugging and DIAG made DFS recognise it.

    After connecting to DFS,it shows that its already in RUIM Mode.

    So After Tinkering a bit I changed the mode to Global and so it connected after restart and started showing reliance.

    Reliance on Lockscreen and Status Bar both.

    I am able to make calls but No Data..

    Keeps showing "Unable to Establish Connection"

    Anyone else with this issue ??

    Data for me seemed to work only with ZVA and before.

  3. Posted · Report reply

    Mine is G2...In Kitkat I was using Cloudy G2 2.2 with RUIM Only Already set...But for Upgrading I went To Stock Zve and updated directly via OTA.Generally according to My experience The config stays after update too but maybe as I flashed back to ZVE TOT the settings may have changed..Now when I insert CDMA sim it tell me Service Disable in Lockscreen and Emergency Calls in Status Bar...

    Maybe if Dfs detects it I will be able to reselect RUIM Only.

  7. Posted · Report reply

    Its still available by some sellers at Shopclues and maybe some other sites..

    http://www.shopclues.com/r-sim-air-2-unlock-for4s-5-5c-5s-ios-6.x-7.1.1-7.x-including-sprint-read-details.html

    http://www.shopclues.com/original-rsim-r-sim-10-unlock-for-iphone-4s-5-5s-5c-6-6plus-ios-6.0-8.x-see-note-5.html

    http://www.shopclues.com/original-rsim-r-sim-for-iphone-4s-5-5s-5c-6-6plus-ios-6.0-8.x-ios-6.0-8.x.html

    And yes RSim site claims that Rsim 10 supports CDMA Sim with 4G..But haven't tried..

    I tried it 8-9 Months back with RSim Mini with no result..So It may work now...If anyone's having Veriozon iPhone then they may please check and confirm..

  10. Posted · Report reply

    Hi RimWebians...

    I am sort of a newbie here..

    I searched the whole forum for this topic but did not find anything related so made a new page.

    I have been trying to get CDMA RUIM working on recent Apple iPhones as iPhone 4 and 4S were the last iPhone I had made working and used on Reliance(via MEID Registeration).

    I have heard a lot about Verizon iPhone (Recent Ones - 5 5S 5C and Probably 6) work on CDMA RUIM maybe via tweaking or directly.

    Till now I have tried RUIM in Indian sets and US unlocked sets and can confirm non working.

    I met a man online who says he has tried RUIM in a Verizon Unlocked Phone and Calls and SMS work straight away.

    After researching more I came to know about a special sim that comes with MIN Programmed in it and you need to get your no. transferred over it (Via WebWorld).

    This sim when inserted in Verizon iPhone work with Data SMS and Calls all without any problems.

    Could someone throw some light on this matter.

    I tried searching over every area and wanted to know if the above is correct.If yes,then where can I buy these "Special SIM" that support data.

    I will be buying Verizon iPhone 5S and 5C accordingly.

    I have almost made my mind to order as it will work with GSM anyways but I want it to work with Reliance CDMA and with data if possible.

    Need Help from Experts.

    Thank You

    • Like 1

  11. Posted · Report reply

    Mine too works with ZV4..I programmed the phone in ZV3 and then updated to ZV4 with everything working perfectly fine till now...Calls SMS and Data all...

    I am still not seeing Hotspot option even after completing the sprint activation and updating the phone.

    I did the sprint activation after programming in ZV3 and updated just after that to ZV4 but no hotspot option..Any suggestions...??

  12. Posted · Report reply

    Hi Rimweb.

    Excellent Tutorial by Varkey..Thanks..

    Tried the steps accordingly and it almost worked.

    I have tried Reliance CDMA in LG Tribute and can confirm that Call,SMS and Data all are working for me.

    For everyone facing data problem,below is the exact tutorial.Highly **NOOB FRIENDLY**

    **MAKE SURE THAT THE SIM CARD IS REMOVED**

    1. Set the phone to NV_Only Mode from DFS via General Tab and press Write.

    2. Then at the top right is the Reset option,press it and the phone will restart.

    3. Now when the phone restarts,connect it to DFS again and change the given below values.

    In NAM Tab -

    1. Read the parameters in the tab.

    2. Change MCC and MNC to 404 and 00 accordingly.

    3. Then Press Write

    In Data Tab -

    1. Read the parameters in the tab

    2. Change HDR AN ,HDR AN Long and HDR AN PPP to ""MEID@hrpd.rcom.co.in"" (Thats what I did)(MEID means yours MEID Number)

    3. Change all other values in the left columns to ""net"" (Thats what I did,not sure if needed)

    4. Then Press Write

    In Mobile IP Tab -

    1. Read all the parameters.

    2. Change the DS QcMIP to SImpleIP

    3. Now Press write.

    4. In the right side in Current user Profile make NAI to "omhtest@omh.relianceinfo.com" (Not needed though)

    5. Below in the same are write RM NAI as "net"

    6. Now Press Write Current Profile Settings

    Finally Now click the Reset option.

    Then after the phone restarts again change the device to RUIM only (as already explained) and Reset the device again(via DFS).

    The data will work now.

    One doubt though from my side I did all the ting thing and deleted my phone from the list,sprint website throws me error while entering the Phone serial number.

    Its been 10 Hours that I did the ting thing and still it showing me this error - There was a problem with the MEID/ESN you provided. Double-check it was entered correctly and try again. If you need help finding the MEID/ESN for the device you are attempting to activate, use our help guide on the right. Otherwise, please call Customer Care at 855-639-4644.

    Any Suggestions.Am I missing something ??

    Thank You

    • Like 4

  13. Posted · Report reply

    I have an iPhone 4 from Verizon.

    I have programmed it to reliance and done everything.

    I have done the manual PRL change method.

    I am facing problems with Akey as I don't have the correct akey.

    I have tried

    12345678901234567890

    01234567890123456789

    12121212121212121212

    I am not able to contact the MEID Registerer.

    He is not contactable.

    My calls are getting disconnected and when called to the number from other phone

    it says "NOT REACHABLE/OUT OF COVERAGE AREA".

    So with research found its an akey problem.

    I have got the no. transferred via MDN Transfer and have done Manual NAM Programming.

    Maybe the FlashPhone Software can help or so.

    Can anyone please provide me.

    Please help.

×