Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
Sign in to follow this  
prasanna.Kesti

How To Make Conference Call On Htc Evo 4G

Recommended Posts

Can any one tell me how to make Conference call on HTC EVO 4g with Reliance service provider.

Share this post


Link to post
Share on other sites

Cant you make by the default method listed in the user's manual?

Once you initiate a call, you will see six onscreen options.

Tap an option to select it.

Add call touch and hold to initiate a 3-way call (page 163).

Merge to join two currently active calls (conference).

Dialpad/Hide to toggle the appearance of the onscreen dialpad.

End call to end the current call.

Speaker to route the device's audio through the speaker (On) or through the earpiece (Off).

Activate Speaker to route the device's audio through the speaker. (You can adjust the speaker volume using the volume buttons.)

Deactivate Speaker to use the device's earpiece.

Mute to mute the microphone during an active call.

Tap again to unmute the microphone.

or try this one

How Do I Make A 3-Way Call, Or Conference Call On My Phone?

To Make a Conference Call, between yourself and two other callers, on the handset follow the steps below:

  1. While in standby mode, dial the number for the first party, then press SEND
  2. When connected, ask them to remain on the line.
  3. Press the SEND key to place them on hold.
  4. Dial the second party's phone number and press SEND.
  5. When the second party answers, press SEND to connect all three parties.

Note: As the originator of the conference call, should you disconnect, the other two parties will also be disconnected. If one of the individuals should disconnect, you will still be connected to the other.

Note: For handsets which support more than 3 individuals on one call, repeat steps 1 through 5 until all parties are connected.

For more information on 3 Way Calling and Conference Calling see your service provider.

or this one listed on Reliance website (for CDMA Postpaid customers only)

Call Conference Three is company Reliance Mobile's Conference Call feature enables you to connect with two (1+2) persons simultaneously and set up a virtual conference. This facility is not available for Reliance GSM customers.

Features

bullet-grey-small.gif A maximum of three people (including you) can participate in a conference anytime. bullet-grey-small.gif Any one can disconnect or drop off from the conference. bullet-grey-small.gif If the initiator of the conference disconnects, then all three are disconnected and the conference call ends. bullet-grey-small.gif A conference call can be set up with any telephone, regardless of the service provider. How to use (CDMA) bullet-grey-small.gif Call the first person and wait until the call is connected. bullet-grey-small.gif Put the call on hold by pressing the call key. bullet-grey-small.gif Dial the second call. bullet-grey-small.gif Wait until the second call gets connected. bullet-grey-small.gif Once the second call gets connected, you have following options: bullet-grey-small.gif Swap between the calls: Press 2 + cell.jpgcall key. bullet-grey-small.gif Drop the person you just dialled and connect to the one on hold: Press 1 + cell.jpgcall key. bullet-grey-small.gif Establish a three-way conference: Press 3 + cell.jpgcall key. bullet-grey-small.gif Once a conference has been set up, you cannot split the participants into two separate calls, until one of them disconnects.

Edited by dkaile

Share this post


Link to post
Share on other sites

How Do I Make A 3-Way Call, Or Conference Call On My Phone?

To Make a Conference Call, between yourself and two other callers, on the handset follow the steps below:

  1. While in standby mode, dial the number for the first party, then press SEND
  2. When connected, ask them to remain on the line.
  3. Press the SEND key to place them on hold.
  4. Dial the second party's phone number and press SEND.
  5. When the second party answers, press SEND to connect all three parties.

Note: As the originator of the conference call, should you disconnect, the other two parties will also be disconnected. If one of the individuals should disconnect, you will still be connected to the other.

Note: For handsets which support more than 3 individuals on one call, repeat steps 1 through 5 until all parties are connected.

This process works in home circle only. While on roaming, you need to dial 3 from the keypad while the second party's phone is ringing. As the second party responds, pressing SEND key connects.

In roaming condition, simple process of 'Call first number, call the second number keeping the first one on hold, and connect by pressing the SEND key' doesn't help.

Edited by sougatadc

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×