Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
shreesh

Tutorial: Configure 1X on Verizon Palm Pre Plus

Recommended Posts

Hello all this is a detail note about getting 1X on verizon palm pre plus

1. first turn off developer mode

2. after phone restart put phone on diag mode

3. connect phone to pc

4. install diag drivers

5. go to computer management and check the port number

6. then open qpst 2.7 build

7. in qpst configuration add the palm port

8. then open qpst service programing

9. you will see mobile esn and name if any.

10. select that phone and say read from phone

11. it will ask for SPC, SPC for all verizon phone are zero.

12. First important thing is to take backup for qpst configuration.

13. there is "save to File...." button , click on it and save the new file.

14. then go to profiles

15. put active profile=0

16. set ip = simple ip

17. then select profile 0 and then click on edit

18. then make all ip=0.0.0.0

19. in profile 0 keep user name password as it is.

20. then go to PPP tab.

21. in UM put user id and password as phone number.

22. do same in AN

23. then do write to phone, it will write all configuration to phone and phone will reboot automatically.

24. then in phone go to epst (##3836#) and put phone on 1x/rtt

25. make all IP zero in browser configuration in phone and reboot the phone

So u can see 1X logo on screen and you can access to internet!!

Edited by shreesh.pvg
  • Like 2

Share this post


Link to post
Share on other sites

21. in UM put user id and password as phone number.

its better to keep it as net / net as wen you resale its easy

bubble-gum-girl--large-msg-129641507021.jpg

Username / PWD thread: http://www.rimweb.in...nce-netconnect/

Data on Pre thread is existing (2nd oct 2009) my friend from out own Legendary Dr KM Mufi : http://www.rimweb.in...t-data-on-palm/

only USERNAME AND PWD has changed

Edited by Genius
  • Like 1

Share this post


Link to post
Share on other sites

Thank you for your genius quote!!!

yes because of mufy's thread it made easy!!!!

Share this post


Link to post
Share on other sites

In my Palm Pixi Plus i am facing strange problem. Whenever I restart the Phone Net/Email works smoothly for 2-3 hours. Then it stopped. 3G icon on phone it blinks continuously, not faded.

When again i restart the phone it works nicely. Worked all the tricks but not succeeded.

Please enlighten the issue.

Share this post


Link to post
Share on other sites

:previous:

NV Dump!

or may be network problem

Edited by shreesh.pvg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×