Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
::Hitesh::

Tutorial: How To Flash Sprint Moto X & any Moto G CDMA To Reliance CDMA

Recommended Posts

gurus please help

yesterday by mistake did the software update for my phone and as expected network gone

reprogrammed it completely once again

signal is back again even *228 says phone is already configured to use with reliance

but unable to make or receive any calls please help

Share this post


Link to post
Share on other sites

If you have saved the MIN, you can write the MIN and MDN again to the phone using DFS. that will get it working again with the same number as before

Share this post


Link to post
Share on other sites

gurus please help

yesterday by mistake did the software update for my phone and as expected network gone

reprogrammed it completely once again

signal is back again even *228 says phone is already configured to use with reliance

but unable to make or receive any calls please help

While doing total reprogramming, have you saved your MIN from phone (or before any time)

If you are getting network and unable to dial any number, then 100% its MIN issue .

If you have your MIN, dial ##000000# and enter your min

Calling and sms should work.

Sent from my Moto G using Tapatalk 2

Share this post


Link to post
Share on other sites

Not able to get spc using the utility on moto g verizona64dd9be51715a59f3958332e4a3753f.jpg

Share this post


Link to post
Share on other sites

gurus please help

yesterday by mistake did the software update for my phone and as expected network gone

reprogrammed it completely once again

signal is back again even *228 says phone is already configured to use with reliance

but unable to make or receive any calls please help

While doing total reprogramming, have you saved your MIN from phone (or before any time)

If you are getting network and unable to dial any number, then 100% its MIN issue .

If you have your MIN, dial ##000000# and enter your min

Calling and sms should work.

Sent from my Moto G using Tapatalk 2

no sir i dont have my min what should i do now or hot to get the min?????

Share this post


Link to post
Share on other sites

Not able to get spc using the utility on moto g verizona64dd9be51715a59f3958332e4a3753f.jpg

How come u r using android 4.4.4??

Sent from my Moto G using Tapatalk 2

Share this post


Link to post
Share on other sites

Hitesh bhai its available for Moto G verizon

Share this post


Link to post
Share on other sites

Its not !

boost is on 4.4.2 only !

4.4.4 only available thru custom roms

Edit :- didn't read before Verizon got 4.4.4

Might be due to 4.4.4 apk is not able to read.

Check for new version of apk

Sent from my Moto G using Tapatalk 2

Edited by ::Hitesh::

Share this post


Link to post
Share on other sites

read somewhere need to put a re otaf request to get my min back

any help on how to do that????

Share this post


Link to post
Share on other sites

I am trying to find but not getting it... spc utility for 4.4.4 is not available any where on internet. if you come across a way then it will be very helpful..

Share this post


Link to post
Share on other sites

Guys Moto released Software alert for Boost - Android 4.4.4, KitKat®

https://motorola-global-portal.custhelp.com/app/answers/indevice_detail/a_id/100754/p/30,6720,9050

Hope we all be receiving 4.4.4 update alert soon.

Share this post


Link to post
Share on other sites

I will wait for zip for updating thru recovery

Also people updating to 4.4.4 should read their spc on 4.4.2 or lower.

Do not update if you don't know your spc.

On 4.4.4 msl apk is not working .

Sent from my Moto G using Tapatalk 2

Edited by ::Hitesh::

Share this post


Link to post
Share on other sites

Is there a way to downgrade 4.4.4 to 4.4.2 ?

Share this post


Link to post
Share on other sites

Is there a way to downgrade 4.4.4 to 4.4.2 ?

No , you will have soft brick phone if you try on locked bootloader of Verizon.

On boost it is possible after unlocking bootloader + twrp

Sent from my Moto G using Tapatalk 2

Share this post


Link to post
Share on other sites

I will wait for zip for updating thru recovery

Also people updating to 4.4.4 should read their spc on 4.4.2 or lower.

Do not update if you don't know your spc.

On 4.4.4 msl apk is not working .

Sent from my Moto G using Tapatalk 2

Does ##7764726 correctly provide SPC under extended NAM after upgrade to 4.4.4 ?

Share this post


Link to post
Share on other sites

I will wait for zip for updating thru recovery

Also people updating to 4.4.4 should read their spc on 4.4.2 or lower.

Do not update if you don't know your spc.

On 4.4.4 msl apk is not working .

Sent from my Moto G using Tapatalk 2

Does ##7764726 correctly provide SPC under extended NAM after upgrade to 4.4.4 ?
On Verizon ## code are not working !

And boost still not updated to 4.4.4 to test msl apk.

From where did u got that code ? Did not work on my boost , some one may confirm..

Posted by Moto G on Reliance CDMA

Share this post


Link to post
Share on other sites

After updating spc utility does not work... any suggestions

forgot to take note of SPC before upgrade

Share this post


Link to post
Share on other sites
I have Moto G Boost already patched for Reliance CDMA.

Recently I wrongly update it to Kitkat 4.4.2.

It stops to show the signals for Reliance.

I used procedure listed in forum.

I got signals.

I dial *228 it says that it is already registered to reliance.

I switched off & on the phone.

Not able to do and receive calls.


MIN=0000000000

MDN=0000000000


reliance prl already patched.

Please advice for further action....

Share this post


Link to post
Share on other sites

I have Moto G Boost already patched for Reliance CDMA.

Recently I wrongly update it to Kitkat 4.4.2.

It stops to show the signals for Reliance.

I used procedure listed in forum.

I got signals.

I dial *228 it says that it is already registered to reliance.

I switched off & on the phone.

Not able to do and receive calls.

MIN=0000000000

MDN=0000000000

reliance prl already patched.

Please advice for further action....

MEID registered?
  • Like 1

Share this post


Link to post
Share on other sites

I have Moto G Boost already patched for Reliance CDMA.

Recently I wrongly update it to Kitkat 4.4.2.

It stops to show the signals for Reliance.

I used procedure listed in forum.

I got signals.

I dial *228 it says that it is already registered to reliance.

I switched off & on the phone.

Not able to do and receive calls.

MIN=0000000000

MDN=0000000000

reliance prl already patched.

Please advice for further action....

MEID registered?

YES MEID REGISTERD IN 03/2014 WORKING WELL TILL THEN,

Share this post


Link to post
Share on other sites

I have Moto G Boost already patched for Reliance CDMA.

Recently I wrongly update it to Kitkat 4.4.2.

It stops to show the signals for Reliance.

I used procedure listed in forum.

I got signals.

I dial *228 it says that it is already registered to reliance.

I switched off & on the phone.

Not able to do and receive calls.

MIN=0000000000

MDN=0000000000

reliance prl already patched.

Please advice for further action....

pm me your complete details. And get your dump file from seller.
  • Like 1

Share this post


Link to post
Share on other sites

Hello,

I've registered my Moto G MEID a few months back. I was busy with my exams and did not manage to get it activated.

A few days back, I went to the Reliance web world in Barrackpore, Kolkata. The guy at the shop explained to me that they don't have CDMA SIM. I tried to tell him that this is not SIM card phone, but he does not seem to understand what I was saying. I have my RSN, and told him to activate my number. Alas, they were not helpful at all. What should I do? Shall I go in there again and explain to them or try somewhere else?

Thanks

Share this post


Link to post
Share on other sites

^ ^ ^

You need to tell them to transfer your existing number / do MDN retain. Give them the MEID of your registered Moto G (Which they refer as RSN). You have to fill a small form for number transfer, give your address / ID proof document copy & one photograph.
Once it is done, you can do activation by dialling *228.

Share this post


Link to post
Share on other sites

I have Moto G Boost already patched for Reliance CDMA.

Recently I wrongly update it to Kitkat 4.4.2.

It stops to show the signals for Reliance.

I used procedure listed in forum.

I got signals.

I dial *228 it says that it is already registered to reliance.

I switched off & on the phone.

Not able to do and receive calls.

MIN=0000000000

MDN=0000000000

reliance prl already patched.

Please advice for further action....

MEID registered?

YES MEID REGISTERD IN 03/2014 WORKING WELL TILL THEN,
You will have to manually feed your min. Though with any update min remains untouched. Only prl and data dump have to be re done
  • Like 1

Share this post


Link to post
Share on other sites

Thanks friends fro your kind support to update my Moto G CDMA XT1031 from 4.4.2 to 4.4.4 and activate its voice & data successfully.

I love 4.4.4 as it is fast & working well.

But ACR (Automatic Call Recorder) , which I was using successfully on 4.3.2 , is not working on 4.4.4

Is there any Call Recorder which can be used on Moto G CDMA 4.4.4 XT4031 flashed for Reliance India?

Or do we need to downgrade 4.3.2 to use ACR?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×