Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
Vishal Gupta

Some Secret & Hidden Codes!

Recommended Posts

Here r some codes!

I'm just copying & pasting these codes from nother site which I found while googling.

PROGRAMMER CODES!

*#06# displays phones IMEI NO.

*#9999# SW Version.

*#8888# HW Version.

*#0842# Vibrator.

*#0289# Buzzer.

*#0228# Battery Stat.

*#0782# RTC Display (?¿)

*#0523# LCD Contrast.

*#0377# NVM error log (?¿)

*#5646# GSM Logo Set.

*#0778# Sim Serv, Table. (?¿)

*#9998*buz# Turns Buzzer On.

*#9998*vub# Turns Vibator On.

*#9998*LCD# LCD Contrast.

*#9998*9999# Sotfware Version.

*#9998*8888# Hardware Version.

*#9998*377# Non Volatile Merory Error Log.

*#9998*NET# SIM NEtwork ID

*#9998*778# SIM Serv. Table.

*#9998*968# Remider Tune.

*#9998*NVM# Displays Non-Volitile Mermory Status.

*#9999*C# Netmon.

*#9998*2576# Forces SIM Error.

*#9998*DEAD# Forces Phone Crash.

*#9998*533# (LED).

*#999* Show date and alarm clock.

*#8999*638# show network information.

*#9998*5646# change operator logoat startup.

*#9998*968# View melody alarm.

*2767*MEDIA# Resets the media on phone <>DELETES all downloaded PICS/TONES <>

*2767*FULL# Resets the EEPRON* <>°DANGEROUS°<>

*2767*CUST# Resets the sustom EEPRON.

*2767*JAVA# Resets JAV downloads ( dealets all downloaded midits)

*2767*STACKREST# RESETS STACK.

*2767*225RESET# ????????????* VERY Dangerous.

#0111*0000000# Removes SIM Lock.

*2767*66335#

*2767*3700#

*2767*7100#

*2767*8200#

*2767*7300#

*2767*2877368#

*2767*33927#

*2767*85927#

*2767*48927#

*2767*37927#

*2767*28927#

*2767*65927#

*2767*29927#

*2767*78927#

*2767*77927#

*2767*79928#

*2767*82927#

*2767*787927#

*2767*73738927#

*2767*33667#

*2767*85667#

*2767*688# = Unlocking code

*#8999*8378# = All in one code

*#4777*8665# = GPSR Tool

*#8999*3825583# = External Display

*#8999*377# = Errors

*#2255# = call list

#*5737425# = JAVA Something chouse 2and it chrashed.

#*536961# = Java Status Code

#*536962# = Java Status Code

#*536963# = Java Status Code

#*53696# = Java Status Code

#*1200# = AFC DAC Val

#*1300# =IMEI

#*1400# = IMSl

#*2562# ?¿ white for 15 sec than restarts.

#*2565# Check Blocking

#*3353# check code

#*3837# = ?¿ White for 15 secs than restarts.

#*3849# = ?¿ white for 15 secs than restarts.

#*7222# = Operation Typ ( class C GSM)

#*7224# = I got ERROR !

#*7252# = Operation Typ ( Class B GPRS)

#*7271# Multi Slot ( Class 1 GPRS)

#*7271# Multi Slot ( Class 4 GPRS)

#*7337# = EEPROM Reset ( unlock and resets Wap settings)

#*2787# CRTP ON/OFF

#*3737# L1 Dbg Data

#*5133# L1 Dbg Data

#*7288# GPRS Attached

#*7287# GPRS Detached

#*7666# SrCell Data

#*7693# Sleep Act/Deact ( enable or disable the black screen after doing nothen for a while)

#*7284# Class B/C Or GPRS

#*2256# Calibration Info

#*2286# Battery Data

#*2679# Copycat Feature (Activate or deactavite)

#*3940# External loop 9600 bps

#*8462# sleeptime

#*5176# L1 Sleep

#*5187# L1C2G Trace ( activate or deactivate)

#*3877# Dump Of spy trace

*#8999*636# Have no clue i see 20 lines

*#8999*8376263# HW Ver SW Ver and build date

*#746565# Checks the locks

*7465625*638*Code# Enables Network lock

#7465625*638*Code# Disables Network lock

#7465625*782*code# Disables Subset lock

*7465625*782*code# Enables subset lock

*7465625*746*code# Enables SIM lock

#7465625*746*code# disables SIM lock

*7465625*28746# Auto SIM lock On

#7465625*28746# Auto SIM lock Off

(*Known Unlock CODES*)

S500/ P400/ E500/ E700/ X100/ X600/ E100/

Enter *2767*3855# with and accepted SIM card If this codes fails, Enter *2767*688# or #*

7337#

A300/ A400 / A800

*2767*637#

Enter code above with an accepted SIM card.

S100 / S300 / V200 / V205 / E710 / E715 / D410 / X426/

*2767*7822573738#

Enter code above with an accepted SIM card.

If the code above fails)

1.) Insert a SIM card which the phone dose not accept.

2.)If you see wrong Card, type #9998*3323#

3.)Press exit and select number 7. Phone will reboot.

4.) Now SIM should work.

5.) Type *0141# and then press call.

6.) Power off the phone and inser anther SIM card.

7.) If a code is requested, enter 00000000.

SOME codes have not been tested. If you come to a code that dose work, play around with the #/* at the beging and the end. Some times it works have fun.

---------------------------------------------------------------------------------

Unlock for a Samsung E715

Samsung e715 Remote Unlock Instructions:-

1. Switch OFF your phone.

2. Put in a SIM of a different network provider.

3. Now turn your phone back on. You will see an error message saying "Wrong Card".

4. Type *#9998*3323# in to your phone.

5. If you've entered the code correctly as outlined in the Step 4, you shall see a screen telling you to press exit. So hit the right soft key.

6. Now you will see a Menu of choices. Scroll down and select option 7 (“Jump to Null”). As soon as you select option 7, your phone will turn black and reboot itself. After your phone reboots, the SIM will be recognized and your SIM will work. (Please be patient while your phone reboots and DO NOT press any keys.)

7. Now, at your welcome screen type in *0141# and hit your call button! This will give you a message saying your phone is Personalized.

8. Power OFF your phone and insert your original SIM.

9. Once done, power ON your phone.

10. At the SIM Code prompt, it will ask you to enter a password. Type 00000000, (that is 8 Zero's). After you enter the code, hit "ok" and your phone should power up.

Your phone is unlocked!!!

You can now put the SIM of your choice into the phone and use it at your will! Without ANY RESTRICTION!!!

---------------------------------------------------------------------------------

Model Number: Kyocera 2255

Code Title: Service Menu

Code: Press 111111, then ok, go to programing, the first security code is 296570, everytime after that it is 493408.

Code Description: You can go into NAM menu to change the phone number, the SID, CDMA settings, and a lot of other stuff the I dont know what they are.

--------------------------------------------------------------------------------

Model Number: Sprint Nokia 5170

Code Title: Nam Menu & SP lock code

Code: *3001#12345# or *#639, there are two service program codes. The first one is 440373 and that only seems to work for *#639. The other one is 057196 and that one is works for any thing that ask for a service program code. You can even change the service program code of your phone using that code.

Code Description: Service Program Code

----------------------------------------------------------------------------------

Model: SprintPCS SCP-6200

Code: ##2769737 [MENU] [sAVE PHONE #] [OK]

Used For: Setting UP-LINK First and Secondary IPs

UP.LINK 1 = Primary IP Address

UP.LINK 2 = Secondary IP Address

----------------------------------------------------------------------------------

Model Number: Samsung Sch-3500

Code Title: Service Menu

Code: 47*869#08#9

Code Description: Phone #, General, NAM

----------------------------------------------------------------------------------

Samsung pch-a400

entered test mode on my sph-a400 Sprint phone, and would like to testify......Do NOT ALTER ANY SETTINGS! I changed number 005, and could no longer get digital service, even though I changed it back to default. I then changed 018 and back, and the phone was useless. The LED blikned, and would do so until the battery was removed. Turning it on later produced the same results. There may be a fail-safe or something. Also, here's a few other numbers I found. They aren't in any order, so there are bound to be more commands out there. these are the few I got before the phone died.

888-00000000

555-Lamp On

556-Lamp Off

554-Backlight Off(Same as042?)

553-Backligt On(Same as 441?)

552-Nothing

551-Read Model(Pressing keys types sph-a400. Lame.)

550- Resetting(This will reset your phone instantly!) There will be a pretty graphic to watch while all you phone info is flushed away. No, it's probably not worth it. BE CAREFUL with this!

----------------------------------------------------------------------------------

Samsung SGH-600 / SGH-2100

Secret Codes

*#06# -> Show IMEI

*#9999# -> Show Software Version

*#0837# -> Show Software Version (instructions)

*#0001# -> Show Serial Parameters

*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status

*#9998*289# -> Change Alarm Buzzer Frequency

*#9998*324# -> Debug screens

*#9998*364# -> Watchdog

*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.

*#9998*427# -> Trace Watchdog

*#9998*523# -> Change LCD contrast - Only with version G60RL01W

*#9998*544# -> Jig detect

*#9998*636# -> Memory status

*#9998*746# -> SIM File Size

*#9998*778# -> SIM Service Table

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN

*#9998*837# -> Software Version

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# -> Diag

*#9998*947# -> Reset On Fatal Error

*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)

*#9998*9999# -> Software version

If the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to *#0523#. An other thing that will help is to remove your simcard.

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)

*0002*?# -> unknown

*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )

But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI program found on the software page.

*2767*2878# -> Custom EEEPROM Reset

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

----------------------------------------------------------------------------------

Sprint PCS Samsung SCH-3500

To access the programming menu:

Press MENU. Press 6 (or scroll to the Display options). Press 0. The phone will ask you for a lock code. My phone's lock code is:

987908

You will have access to three menus:

1:Phone#

2:General

3:NAM

Press 1 to access the "Phone#" menu. The first option will be "Phone #". Enter your phone number and press OK. The second option will be "MOBILE ID #". On my phone, this is the same as my phone number. Enter it in and press OK. You will return to the "Svc Menu".

Press 2 to access the "General" menu. You will have access to a variety of options I don't even understand. One of these is "Lock Code", which is simply the phone's four-digit security code.

Press 3 to access the "NAM" menu. You will have access to another variety of options I don't understand. One of these is "Home SID", which designates your home market of the Sprint PCS Nationwide Network.

Don't allow the phone to remain in this menu too long, or it will exit the programming menu and reboot.

To manually exit the programming menu, hit "END" at any time. The phone will display "Service Done", turn off, and reboot with your new settings.

-------------------------------------------------------------------------------

keyocera 2255

setup

kyocera 2255 from virgin mobile and since its prepaid you have to set up most everything your self here is the information that virgin wireless gave me to set up my phone

1. Start by turning on your phone (press the red End key on the upper right side of the keypad) and wait for it to power up - this should take just a couple of seconds. Check to see that you put your battery back in your phone after activation. Make sure your battery is fully charged, or plug the phone into an outlet - preferably electric. Avoid gas and hamster power sources.

2. You will now see a screen that says "Virgin Mobile" and some other stuff. Using the keypad, enter six "1's." Your screen should show "11-1111." "Option" should now be highlighted at the bottom of the screen. Press the "OK" key.

3. Now are you at the "Options" menu. Using the funny navigational key with the up and down arrows on it, press the down arrow once to highlight the "Programming" option. Press the "OK" key.

4. You'll now be prompted for a security code. Using your keypad, enter "847446" (equals "VIRGIN"). Dial carefully. If you don't enter the code correctly after 3 tries, your phone will lock up. If this happens to you, call Central Intelligence at 1-888-322-1122 for help.

5. After a few seconds, the "Service Options" menu will appear. Press the down arrow on the navigational key once to highlight the "Phone Number" option. Press the "OK" key.

6. You are now on the "NAM1 Phone Number" screen. If any numbers appear on this screen, clear them out by pressing the "CLR" key (this is the key on the right side of the up and down arrows key), until all the numbers are gone. Now enter the new 10-digit cell phone number that we gave you. Hit "OK."

----------------------------------------------------------------------------------

Samsung A460

47*869#1235 - Test Mode

Test Mode Commands:

001 suspend

002 reboot

004 Show mode

005 set mode (PCS, CDMA, AMPS, none) - WARNING: due to a software bug,

using this option can render your phone inoperable on the PCS

system.

011 Carrier : ON

012 Carrier : OFF

014 CHAN set

015 CdTk_adj set

016 CD TXagc set

018 FM TXagc set

019 LNA Gain set

020 LNA Rs set (LNA Rs[0] - LNA Rs[8])

021 SIOMODE (SSHF, QXHF, QXDM, SSDM)

022 TEST_S

023 DATA Svc : ON

024 DATA Svc : OFF

031 MRU TABLE: MRU set/select

032 Send NAM

033 Send S/W ver.

034 Send ESN

035 Product Info

038 Clr Memory (00-55)

039 Send P Info

040 PRD Info set/select

041 Backlight ON

042 Backling OFF

043 Lamp ON

044 Lamp OFF

045 Vibrator ON

046 Vibrator OFF

047 DTMF ON (0-9)

048 DTMF OFF

049 Contrast set

050 Front LCD contrast set

051 BATT TYPE/ID show

052 RD Bat Val: Num keys toggle between Talk Batt and Stdby Batt

053 Stdby Batt

054 Talk Batt

055 WR Batt

056 Chrg_lvl

057 Therm_lvl

058 String of numbers; set or select. Unknown function. Changing them

can cause phone to lock up.

060 RD_Rssi set

061 PCSRxRAS show [00 - 1

062 WrPCRX show [00 - 16]

063 TXPCS[01-16] show

064 PCSFL[00-16] show

065 PCS_lmt set

066 PCS_temp show/set

090 GPS_DOPP set

091 GPMS Mode show

092 D_GPSP set

093 D_PCS set

095 GPS_ANT set

096 GPC_BCNT set

097 GPC_LCA set

098 GPS_LOSS set

099 D_GPSC set

100 D_CDMA set

121 '46 Ahead!!!!!' then TxLmt set

122 PCM loop on

123 PCM loop off

124 PCM[00-11] on/off (Handset RX/TX/SL Headset RX/TX/SL

New HFK RX/TX/SL EXT AUD RX/TX/SL

125 GAIN[00-19] set

126 GAIN[00-07] set

131 Get PCS Dat1

132 Get PCS Dat2

133 Get PCS Dat3

134 Get CDMADat1

135 Get CDMADat2

136 Get CDMADat3

137 Get AMPSData

138 Get AudData1

139 Get AudData2

140 Get AudData3

MENU -> 4 -> 0 : "Hidden Set:

1: Start App

2: Serv Info

1: Config (select local or default)

2: Default

1: IP Address

2: IP Port

3: Local

1: IP Address

2: IP Port

3: QOS

1: Performance

2: Quality

3: Measure

4: Transport (DBM or IP)

5: Lock Status

6: Test Mode (GPS test mode: Off/Single/Continue)

7: Sample Cnt (1,3,5,7,10)

MENU -> 8 -> 0 -> xxxx

Features unknown; couldn't crack password.

MENU -> 9 -> 0 -> 040793

1: Debug Screen (Field Test)

2: Test Calls

3: Voice SO (Default/8k/EVRC/13k)

4: Errors (Show last 20 errors)

5: Clear Errors

6: Data Screen

7: Toggle QNC

##096295 : Service Menu

1: Basic

Display/Set :

MOBILE Phone Number

NAM MSIN

NAM Home SID

2: General

Display/Set :

ESN

CAI Revision

Origination SVC OPT

SCM

Lock code

SLOT MODE (Yes/No)

SLOT CYCLE INDEX

3: NAM

Display/Set :

NAM Home NID

NAM MOBILE Country Code

NAM MOBILE Network Code

NAM ACCOLC

NOTE: I've been told that this is an 'Access Overload Code'

that determines the 'importance' of a call. Supposedly,

1-6 is for standard usage, 7-9 is for emergency

workers, and 10-15 are for government. Setting your

phone to anything above 9 may be illegal. I don't know

the degree of truth behind this, but it's probably best

to leave this setting alone.

NAM CDMA Home Sys Reg (Yes/No)

NAM CDMA FSID Reg (Yes/No)

NAM CDMA FNID Reg (Yes/No)

##932 OK : IP Address

Gateway 1

Gateway 2

Gateway 3

##786 OK : Reset Phone

Lifetime

Clear Memory

-------------------------------------------------------------------------------

Model Number: Samsung SPH-I300

Code Title: Programming code

Code: #907*9#0

Unlock: 100639

Code Description: Programming code for Samsung SPH-I300. I've only used this on one phone so I don't know if it is unique to my phone/ESN but try it and see where you get. It is usually pretty easy to get this info out of your Sprint Techies with a little bit of social engineering.

-------------------------------------------------------------------------------

model *unknown*

##8626337 (##VOCODER)

View/Change Vocoder Settings (Data compression rate)

##3282 (##DATA)

View/Change Vision username/p@$$word info

##786 (##RUN)

View lifetime phone usage information

##2769737 (##BROWSER)

View/Change gateway and port information

---------------------------------------------------------------------------------

Handset Programming Instructions

Audiovox 9100

1. Press ##

2. Enter the OTKSL

3. Display will read Service/Menu 1 Basic…press OK

4. Next screen will read Service Mode/Home SID…press OK

5. Next screen will read Service Mode/Home SID…press OK

6. Device will display Service Menu 1. Basic #

7. Press END button to complete programming

Handspring TREO

1. Open the flip and press the PHONEBOOK button one time to display the dial pad

2. Enter ## and the OTKSL using the numbers on the Dial Pad

3. Press the handset button shown in the diagram above

4. At the Activations screen enter the MIN in the phone number field using the numbers on the device keyboard

5. Put a check in the Enable Number Portability box and type the MSID in the MSIN field

6. Press OK

7. The device will display the network search pop-up and return to the Phonebook display

Hitachi P300

1. Enter ## and the 6 digit OTKSL

2. Press the Options soft key and then scroll to Save Phone #. Press the OK soft key.

3. At the NAM display scroll to EDIT and press the OK soft key

4. Display will read NAM and MDN will be highlighted. Press the OK soft key.

5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.

6. At the Save prompt press the OK soft key. The next display will show several options that should not edited.

7. Press the EXIT soft key and the device will power cycle.

8. Programming is complete.

Kyocera 2345 1135

1. Press 111111 (#1 key 6 times)

2. Option will be highlighted

3. Press OK

4. Scroll down to Programming

5. The service programming dialog will appear Enter Security Code.

6. Enter the 6 digit OTSKL (code will show as asterisks on screen)

7. Service Options will appear

8. Scroll down to the BASIC NAM1 Info

9. Press OK

10. Select the Phone Number by pressing the OK key

11. Using the keypad enter the 10 digit MIN

12. Press OK

13. Press END to complete the programming

Kyocera 6035

1. Press 1 six times (111111) and select OPTIONS

2. Select PROGRAMMING

3. Open flip

4. Tap the OTKSL on keypad on the screen. Tap OK

5. Tap on the PHONE NUMBER field. Enter MIN.

6. Leave A-KEY blank

7. Enter HOME SID (4654)

8. Tap SAVE & EXIT

9. Tap YES

10. Phone will be in OFF MODE Close flip.

Kyocera 3035

1. Press 111111 (the #1 key six times)

2. Options will be highlighted

3. Press in the navigation key (Navigation key is the button located between the TALK & END key)

4. Scroll to PROGRAMMING using the Navigation key

5. Select PROGRAMMING by pressing in the Navigation key

6. Enter the six digit OTKSL and press in the navigation key

7. SERVICE OPTIONS will appear

8. Scroll down to the Basic NAM1 info

9. Press in the navigation key

10. Clear any numbers that may appear using the “clear” key (arrow key located directly below the navigation key)

11. Select the PHONE NUMBER by pressing in the navigation key

12. Enter the 10 digit MIN select OK by pressing in the navigation key

13. Press END. Programming is complete.

Kyocera 2255

1. Press the 1 key six times (111111) “Option will be highlighted

2. Press OK

3. Scroll down to “Programming” and press “OK”

4. Enter OTKSL and press the navigation key

5. “Service Options” will appear scroll down to the “Basic NAM1 Info”

6. Press OK

7. Select Phone Number by pressing OK

8. Enter MIN and press OK again

9. Scroll to Home SID and press OK

10. Enter SID (4654) and press OK

11. Press END. Programming is complete.

LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200

1. Press ##

2. Enter the OTKSL

3. Scroll to SAVE and press OK

4. Scroll to MIN and press OK

5. Enter 10 digit MIN scroll to SAVE and press OK

6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)

7. Enter SID (4654) and scroll to SAVE and press OK

8. Programming is complete

LG5350

1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”

2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key

3. Enter the 10 digit MIN and press OK

4. Scroll down to 4. Advanced and press OK

5. Scroll to NMSI and press OK

6. Enter the MSID and press OK

7. Scroll down to 9. Amps Phone # and press OK

8. Enter the MSID and press OK

9. Press the END key

Motorola Tarpon (120x)

1. Press 74663 (spells PHONE)

1. Press # MENU MENU quickly

2. Enter OTKSL

3. The work MIN will be highlighted

4. Select the word CHANGE by selecting the top right button

5. Select DELETE. Press and hold the button until clear

6. Have the customer enter the 10 digit MIN number

7. Select OK with the top right button. The “User Activation” screen will appear

8. Scroll to highlight the CDMA Sys ID

9. Select CHANGE by selecting the top right button

10. Enter SID

11. Select OK by selecting the top right button

12. Select DONE with the top left button

13. Press the END key

Motorola Tarpon (120x)

1. Press 74663 (spells PHONE)

14. Press # MENU MENU quickly

15. Enter OTKSL

16. The work MIN will be highlighted

17. Select the word CHANGE by selecting the top right button

18. Select DELETE. Press and hold the button until clear

19. Have the customer enter the 10 digit MIN number

20. Select OK with the top right button. The “User Activation” screen will appear

21. Scroll to highlight the CDMA Sys ID

22. Select CHANGE by selecting the top right button

23. Enter SID

24. Select OK by selecting the top right button

25. Select DONE with the top left button

Press the END key

Motorola Phones (ALL)

1. Enter 74663 # FCN FCN

2. Enter OTKSL

3. Enter MIN and press STO

4. Enter SID (4654) and press STO

5. Press STO again – programming is complete

Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.

Neopoint 1000

1. Press M to display Main Menu

2. Scroll to PREFERENCES

3. Press softkey under SELECT

4. Enter 040793

5. Scroll to PROGRAMMING

6. Press softkey under SELECT

7. Enter OTKSL

8. Press softkey under DONE

9. Scroll to PHONE NUMBER

10. Enter 10 digit MIN

11. Scroll to HOME SID

12. Enter SID (4654)

13. Press softkey under SAVE to exit

14. Programming is complete

Nokia 6185-5170

1. Press *#639#

2. Enter OTKSL and press OK

3. Enter the MIN and select OK

4. Enter the SID and select OK

5. Programming is complete

Nokia 3585

1. Enter ## followed by the OTKSL

2. Number (MDN) is highlighted. Press the upper left-hand soft key to select

3. Mobile Number will display. Enter the 10 digit MIN

4. Press OK

5. IMSI will appear. Press and hold the Clear key until the display is empty.

6. Enter 31000 plus the MSID (15 digits total)

7. Press the upper left hand soft key and select OK

8. It will take you back to the SVC Programming. Press the upper right hand soft key to select EXIT

9. Press END.

10. Phone will power cycle and programming is complete.

QCP 2035

1. Press 1 six times (111111)

2. Press u key to select OPTIONS

3. Highlight PROGRAMMING and press u key

4. Enter OTKSL

5. ESN will appear press left arrow key to select OK

6. Enter MIN and press ç key

7. 7. Press ç key again to exit - Programming is complete

QCP 1960 and 2760

1. Press softkey under the work MENU

2. Press 8 0

3. Enter the OTKSL

4. Press softkey for OK

5. Enter MIN and press softkey for OK

6. No SID is require for this handset

7. Press softkey for EXIT

8. Programming is complete

Samsung A500

1. Enter ## and the 6 digit OTKSL

2. SERVICE MENU will appear and 1.Basic will be highlighted

3. Press OK

4. Device will display NAM CDMA/ Phone Number

5. Enter 10 digit MIN

6. Press OK (3 times)

7. Display will return to Service Menu. Press END.

8. Programming is complete

Samsung N240 and N400

1. Enter ## and type in the 6 digit OTKSL

2. The display will show SVC MENU and 1. Phone Number

3. Press OK

4. Enter the 10 digit MIN and press OK

5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)

6. Press OK

7. The display will return to the SVC MENU

8. Press END to complete the programming

Samsung Uproar

1. Press MENU key

2. Enter 9 2 0

3. Enter the OTKSL

4. At SVC Menu screen press OK

5. Enter MIN and press OK 4 times

6. Enter SID (4654) and press OK

7. Press END key

8. Programming is complete

Samsung N300

1. Press ## followed by the OTKSL

2. SVC menu will be displayed

3. Press 1 for Phone #

4. Enter the 10 digit MIN and press OK

5. MIN that was entered will be displayed press OK

6. SVC Menu will display press 3 for NAM

7. Enter the 4 digit Home SID press OK

8. Press END and handset will power cycle

Samsung i300

1. Tap on the Phone Icon with stylus

2. Press #907*9#0 ENTER LOCK should appear on screen

3. ENTER OTKSL

4. SVC MENU will appear press 1

5. Enter 10 digit MIN and then press SAVE

6. Press SAVE again

7. Press 3 and then press SAVE 6 times

8. Enter the HOME SID and press SAVE once

9. Press END key twice

Samsung A400 and A460

1. Enter ## and OTKSL

2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)

3. Enter 10 digit MIN and press OK

4. At 1.Basic Menu press the END key

5. Handset will power cycle

Samsung 3500 8500 6100 N200

1. Press MENU

2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)

3. Enter OTKSL

4. Press 1 at SVC MENU Screen

5. Enter MIN and press OK

6. Press OK 4 times

7. Enter SID (4654) and press OK

8. Press END key

9. Programming is complete

Sanyo 4000 4500 4700 5000 6000

1. Press ##

2. Enter the OTKSL

3. Scroll to SAVE and press OK

4. ESN will be displayed – press OK

5. Enter 10 digit MIN and press OK

6. Enter SID (4654) and press OK

7. Press OK twice

8. Programming is complete

Sanyo 5150 5300 and 6400

1. Enter ## followed by the OTKSL

2. Press MENU SAVE PHONE #

3. Press Ok

4. SVC Programming will be displayed. Scroll and highlight Mobile Number. Press OK

5. Press OK again

6. ESN will be displayed. Press OK

7. Mobile Number will be displayed enter the 10 digit MIN press OK

8. Press OK 4 times

9. Phone will power cycle

10. Programming is complete

Sanyo 6000

1. Press ##

2. Enter OTKSL

3. Press MENU Key and scroll to SAVE PHONE # and press OK

4. ESN will be displayed press OK

5. Enter MIN and press OK

6. Enter SID and press OK

7. Press OK twice more

8. Programming is complete

Sanyo 4900

1. Enter ## followed by the 6 digit OTKSL

2. Press the MENU/OK key and scroll and highlight SAVE PHONE #

3. Press MENU/OK

4. Scroll and highlight MOBILE NUMBER press OK

5. At the ESN display press OK

6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times

7. At the service program menu scroll to exit and press the MENU/OK key.

8. Programming is complete

Sanyo 6200

1. Enter ##

2. Enter OTKSL

3. Press the MENU key and scroll to highlight SAVE PHONE #

4. Press OK

5. Scroll and highlight MOBILE NUMBER

6. Press OK twice

7. Scroll and highlight EXIT

8. Press OK

9. Phone will power cycle

10. Programming is complete

TP 2100

1. Press ##

2. Enter OTKSL

3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)

4. Select NEXT (by pressing in the roller ball)

5. Scroll to EDIT and press in the roller ball

6. Enter MIN

7. Scroll to SAVE and press roller ball in

8. Select NEXT at the next 3 screens and then EXIT

9. Programming is complete

TP3000

1. Press ##

2. Enter OTKSL

3. Scroll to SAVE and press OK

4. Open flip

5. Use Stylus to enter the 10 digit MIN

6. Press OK (No SID entry is required)

7. Programming is complete

TP 5250

1. Press ##

2. Enter the OTKSL

3. Scroll to SAVE and press OK

4. The phone display will read SVC Program

5. Scroll to MOBILE PHONE # and press OK

6. Phone display will read Mobile Phone Number

7. Enter the 10 digit MIN and press OK

8. Scroll to Home SID and press OK

9. Enter the 4 digit SID (4654) and press OK

10. Reset Phone will be highlighted. Press OK

11. Phone will reset

12. Programming is complete

Toshiba 2032P

1. Slide the Radio Standby Switch on the left side of the device to the upper side (ON) to activate the phone function. This is the switch with the phone icon over it

2. After power up is completed use the stylus to tap on the ADMIN pull up menu at the bottom of the screen and select ACTIVATION WIZARD. If your device has not yet been activated the ACTIVATION WIZARD will automatically start when you turn on the radio in your device.

3. Tap NEXT 3 times. If the device has been previously activated it will require only 2 presses.

4. On the fourth screen enter the 6 digit OTKSL using keyboard

5. Enter the MIN in both entery fields then tap NEXT

6. Wait for the device to initialize and display “ready to connect”

7. To initiate IOTA tap the word ADMIN at the bottom of the display and then Data Provisioning

8. Programming is complete

-----------------------------------------------------------------------------------

##2769737 [##BROWSER] - MiniBrowser Settings (2G)

##8626337 [##VOCODER] - Set Vocoder

##3282 [##DATA] - Setup Menu for Vision handsets

##8463 [##TIME] - Airtime Menu

##040793 - Debug Menu

##786 [##RUN] - Technical Information (be careful with this one, you can reset the handset)

##932 [##WEB] - IP Address information (2G)

##889 [##TTY] - TTY On or TTY Off

##4357 [##HELP] - Help

-----------------------------------------------------------------------------------

Nokia unlock ##123456 (whatever the msl is)

Sanyo unlock ##123456 Then press Save number

The SID is the local Tower/calling area

MSID for most phones is the telephone number or 0000 then the telephone #

-----------------------------------------------------------------------------------

n400

Service Code - Menu + 010 + 040793

Mobile IP 1 Code - ##3282 + OK

System Code - ##786 + OK

NGG Setting Code - ##2769737 + OK(Browser Setup)

Vocoder Code - ##8626337 + OK

----------------------------------------------------------------------------------

Model Number: LG 5350

I've gotten these to work.

##rtn 786

##akey 2539

##data 3282 (needs MSL)

##gps 477

##debug 33284

##vocoder 8626337

##cdg2 2342 (needs MSL)

##browser 2769737

##tty 889

##prev 7738 (needs MSL

--------------------------------------------------------------------------------

Sanyo 8100

1. Enter ## followed by the 6 digit MSL.

2. Press the MENU/OK key and scroll and highlight SAVE PHONE #

3. Press MENU/OK

4. Scroll and highlight MOBILE NUMBER press OK

5. At the ESN display press OK

6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times

7. At the service program menu scroll to exit and press the MENU/OK key.

8. Programming is complete

-------------------------------------------------------------------------------

SCH-8500 Owners.

The default lock code for your Sprint PCS Phone is generally 0000 or the last four digits of your phone number.

----------------------------------------------------------------------------------

x105

Here are some codes for your mobile:

IMEI Number *#06#

Software Version *#9999#

Hardware Version *#8888#

JAVA Configuration *#9998*JAVA#

View battery information *#0BAT#

Buzzer On *#0BUZ#

Display Brightness *#0LCD#

Run Time Clock *#0RTC#

Vibrator On *#0VIB#

Serial Parameter Change *0001*s*f*t#

Digital Audio Interface On *#DAIENTER#

Digital Audio Interface Off *#DAIEXIT#

Full EEPROM Reset (changes IMEI to 447967-89-400044-0) *2767*3855#

User EEPROM Reset *2767*2878#

For SGH-Rxxx and Nxx:

Display contrast *#9998*523#

*#9998*523*0#

Ringtone frequency *#9998*289#

*#9998*289*0#

Memory status *#9998*636#

*#9998*636*0#

SIM file size *#9998*746#

*#9998*746*0#

SIM card service table *#9998*778#

*#9998*778*0#

View battery information *#9998*228#

*#9998*228*0#

Vibration On *#9998*842#

*#9998*842*0#

Voice codec setup (normal, headphones or speakerphone) *#9998*862#

*#9998*862*0#

Debugger window *#9998*324#

*#9998*324*0#

Phone Book:

List-view from SIM card NNN#

List-view from MEM phone +NNN#

Network Operator Services:

Language Reset (Default) *#0000# + green

Phone Reload + Denmar Language *#0007# + green

Divert Always All Calls *#0021# + green

Barring All Incoming Calls *#0035# + green

Phone Reload + English Language *#0040# + green

All Calls Busy *#0067# + green

Answering Number (Shown/Hidden) *#0076# + green

My number (Sent/Not sent) when answering *#0077# + green

Number of caller (Show/Not show) *#30# + green

My number (Sent/Not sent) when I call *#31# + green

Check status All Outgoing All Calls *#33# + green

Check status All Incoming All Calls *#35# + green

Check status Call waiting (data/voice) *#43# + green

Check status All Incoming No Reply *#61# + green

Check status All Incoming Not Available *#62# + green

Check status All Incoming Busy *#67# + green

---------------------------------------------------------------------------------

Data cable and software is not the answer to EVERY QUESTION!

HERE IS HOW YOU REMOVE THAT (T-Mobile) ABOVE YOUR TIME!

First set your S105 graphic logo to "On": (thx Dexter)

Click on "Menu" on your S105

Select "Phone Settings"

Select "Display Settings"

Select "Graphic Logo"

Choose "On"

Then send yourself an operator logo:

Go to http://www.nextones.com

Click on the "Register" Tab

Pick your Country (USA)

Choose your phone model (S105)

Enter your personal information

Check your email for login information

Log into nextones.com

Click the "Freebees" icon

Click on the "Free Icons" link

Choose any icon, then click on the "Send" image

Under "Logo - Choose Wireless Carrier" click on the radio button labeled "Logo - T-Mobile USA"

Choose your state in the drop down.

Click the "SEND TO PHONE" button

You should receive a message on your phone - "New Message operator logo Nextones"

Click "View" to go to your Inbox

Click "View" to read the message

Click "Options"

Choose "Save"

When you get back to your main screen you should see that operator logo above your date and time. If you want it to be blank, purchase some credits from Nextones (or play games to get free credits) and create a blank logo, then repeat the process. Make sure you try a free logo first to make sure it works.

If you do not receive a message on your phone, you might want to try using another location (Step 12). For example, California has 2 options under the State dropdown: "California Default" and "California Backup". If "Default" doesn't work, try "Backup".

If you have tried different locations and still don't receive a message, you might want to try selecting a different Carrier (Step 11). Some T-Mobile customers actually use Cingular networks.

Here is a link for FLASHING your phone. (To remove your time/date on your phone)

http://www.s105.com/guide/flash_intro.php

Here are Codes that you your self can do to your phone

CONFIGURATION CODES

Caution: Changing the configuration of your handset can stop certain features from functioning.

Code Description

*#VSWAP# Access to WAP browser CSD/GPRS settings

*#VSMMS# Access to MMS settings (v205 handset only)

*#9998*JAVA# Access to Java CSD/GPRS settings

RESET CODES

Be careful using these reset codes. Once a reset code is entered, it cannot be undone.

Code Description

*2767*JAVA# Deletes all downloaded Midlets. This does not delete the factory midlets

*2767*WAP# Resets all WAP settings to factory settings. Deletes all favorites

*2767*MEDIA# Deletes all download ringtones and wallpapers. This does not delete the factory ringtones/wallpapers

*2767*STACKRESET#

#0111*00000000# Codes used to sim unlock the s105 handset. Visit Handset FAQ for more info.

*2767*FULL# *WARNING: THIS IS A FULL PHONE RESET. USE WISELY *

Resets ALL settings back to factory settings. This deletes ALL entered information, downloaded ringtones, wallpapers, midlets, etc.

DIAGNOSTIC CODES

Code Description

*#06# Displays IMEI Number

*#9998*9999# Displays handset software version

*#9998*8888# Displays handset hardware version

*#9998*76# Displays handset product number

*#9998*228# Displays battery information: Type, Voltage, Temperature, Tx Level

*#9998*523# Displays LCD contrast setting. Press up or down to adjust.

*#9998*842# Tests vibrate

*#9998*289# Tests melody (Turn Silent Mode off to test)

*#9998*help# Displays list of diagnostic codes

How To Enter Codes:

Flip open your s105 handset

Key in the code as if you were making a phone call

Letters are represented by number equivalient. For example, VSWAP = 87927.

(ABC=2, DEF = 3, GHI = 4, etc.)

Here is how to UNLOCK your Phone!

How do I sim unlock my s105 handset?

This does not work with firmware version S15UVWA3.

To sim-unlock the s105:

Enter the Stack Reset code: *2767*STACKRESET#

The phone will power cycle.

Enter unlock code: #0111*00000000#

Press the Talk key

The phone will display a "Personalization Cancelled" message.

Once you see this message your s105 will be unlocked. You will be able to use it with other carriers.

If you are a T-Mobile customer and the sim-unlock code does not work on your handset, you can request an unlock code from T-Mobile by sending your name, mobile number, account number, and IMEI number to SIMUnlock@t-mobile.com. If you are concerned about sending your account info to an email address, call T-Mobile (611) and request one over the phone.

*If you enter an incorrect sim unlock code 3 times in a row, your phone will lock. To remove this lock, use the stack reset code: *2767*STACKRESET#*

Share this post


Link to post
Share on other sites

My Pleasure!

I'll always share nething, that I find useful & suitable ;) 4 this forum & its gr8 members! :)

Share this post


Link to post
Share on other sites

Most of they codes are "customised" for individual handsets/service providers by the phone manufacturer.

For instance for I am yet to find some good codes (besides AKEY and a few more) for the Samsung SCH A563. None of the codes for the 565 (Spanish/Brazilian edition) or the 500 (US Edition) seem to work!

Share this post


Link to post
Share on other sites

HI Vishal,

Thank you for the information.

For most of the kyocera phones I find the following

Enter SID (4654) and scroll to SAVE and press OK

What is a SID number? Is this number related to the provider? Is this for Reliance?

Using the keypad enter the 10 digit MIN

What is a 10-digit MIN?

-PK

Share this post


Link to post
Share on other sites

MIN:

Mobile Identification Number. A number assigned by the wireless carrier to a customer's phone. The MIN is meant to be changeable, since the phone could change hands or a customer could move to another city.
SID:
The SID (System Identification Number) is a number (0-32,767) transmitted by base stations that identifies a wireless system that conforms to a TIA cellular or PCS standard. The SID is used by mobiles to recognize when they are in their home system (e.g. it controls the "roam" light). Some newer phones may maintain a list of "preferred" systems identified by their SID code. The SID may also modify some signaling messages that are transmitted by mobiles.

In the wireless network, the SID is used for billing purposes, as a unique identification of the system that is serving a mobile (and that thus must be compensated for services provided to roamers).

Share this post


Link to post
Share on other sites

Good post .... but many of the codes are only for GSM mobs ...

Share this post


Link to post
Share on other sites

Hi Vishal,

Thank you very much for a quick reply.

In one of my web searches I came across the following information about SID on

http://www.ifast.org/NationalSID.htm

14655-14674 India—Reliance

So, this is what I understand from the information you gave me. Reliance will assign one or more of these SIDs to mobile phones to track the home/roaming areas for each mobile phone. Thus, when I take a connection from Reliance by buying a Reliance phone (with an unassigned number), Reliance will program the phone with SID, etc.

Thanks once again.

-PK

Share this post


Link to post
Share on other sites

::MOTOROLA::. TIPS & TRICKS

These Motorola codes will work on most Motorola Mobile Phones,

Code

Description

*#06#

For checking the International Mobile Equipment Identity (IMEI Number).

[][][] 119 [] 1 []

Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%.

[][][] 119 [] 0 []

Deactivate Enhanced Full Rate Codec (EFR).

----------------------------------------------------------------------------------

.::NOKIA::. TIPS & TRICKS

These Nokia codes will work on most Nokia Mobile Phones,

Code

Description

*3370#

Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

#3370#

Deactivate Enhanced Full Rate Codec (EFR)

*4720#

Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.

#4720#

Deactivate Half Rate Codec.

*#0000#

Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.

*#9999#

Phones software version if *#0000# does not work.

*#06#

For checking the International Mobile Equipment Identity (IMEI Number).

#pw+1234567890+1#

Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+2#

Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+3#

Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+4#

SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

*#147#

(vodafone) this lets you know who called you last.

*#1471#

Last call (Only vodofone).

*#21#

Allows you to check the number that "All Calls" are diverted to.

*#2640#

Displays security code in use.

*#30#

Lets you see the private number.

*#43#

Allows you to check the "Call Waiting" status of your phone.

*#61#

Allows you to check the number that "On No Reply" calls are diverted to.

*#62#

Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.

*#67#

Allows you to check the number that "On Busy Calls" are diverted to.

*#67705646#

Removes operator logo on 3310 & 3330.

*#73#

Reset phone timers and game scores.

*#746025625#

Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.

*#7760#

Manufactures code.

*#7780#

Restore factory settings.

*#8110#

Software version for the nokia 8110.

*#92702689#

Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

*#94870345123456789#

Deactivate the PWM-Mem.

**21*number#

Turn on "All Calls" diverting to the phone number entered.

**61*number#

Turn on "No Reply" diverting to the phone number entered.

**67*number#

Turn on "On Busy" diverting to the phone number entered.

12345

This is the default security code.

press and hold #

Lets you switch between lines.

=====================================================

::ERICSSON::. TIPS & TRICKS

These Ericsson codes will work on most Ericsson Mobile Phones,

Code

Description

*#06#

For checking the International Mobile Equipment Identity (IMEI Number).

*#0000#

Reset language back to English.

> * < < * < *

Service Menu - tells you the phone's software version (good for checking your phone's "age" before buying it) Press "Yes" repeatedly to see all the software data & press ">" to see all the texts available in your phone.

< * * <

SIM lock - Do not lock your phone if you don't know the unlock code. This is another good check before you buy any phone, especially second hand ones. If phone is SIM locked, you may not be able to switch to other GSM operators.

Shortcuts

Save a Missed Call into

your phone directory

Scroll to "Missed Call", press "Yes" to display the required number. Press any number (i.e. 0 to 9), then press "clear" once to clear that number, then press & hold "<" until you see "Store". Press "Yes"

Hide your number when calling when you don't

want the other party to

know your number)

After dialling the required number & before pressing "Yes", press ">" twice to choose "Hide Id?" & then press "Yes". Also works for pre-programmed & last dialled numbers just press "No" & wait for the number to appear on the screen first then follow same procedure

Check you battery

level when phone is off

Press "No" quickly one time & wait for the battery meter to show up!

Save a number into your phone memory (not SIM card)

Follow normal procedures to store a phone number. When prompted to set a storage position, press "#" once & key in desired location, or press "#" twice for next available position

Call a phone number from

SMS message

You can call from within a SMS message if the phone number is written in it. Just scroll the message until the phone number appears on the display, then press "Yes" to call

===========================================================

.::PANASONIC::. TIPS & TRICKS

This Panasonic codes will work on most Panasonic Mobile Phones,

Code

Description

*#06#

For checking the International Mobile Equipment Identity (IMEI Number).

========================================================

:SIEMENS::. TIPS & TRICKS

All Siemens Phones: Service Provider Unlock: *#0003*(secret code 8 digits)#

Siemens S25/C25

SP unlock *#0003*(secret code 8 digits)#

Show IMEI code: * # 06 #

Resets language to automatic selection : * # 0000 # then Green button

Pin Out

Data Cable schematics

Phone's connector pin-out:

1- GND

2- SB

3- POWER

4- NC

5- TX

6- RX

7- CLOCK

8- DATA

9- GND MIC

10- HF MIC

11- AUDIO

12- GND AUDIO

Siemens S1/S3/S3 Com

To view the software date and else with S3 com, S4, S4Power, Sony cmdx 1000e press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power, Sony cmdx 1000e press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Power, Sony cmdx 1000e press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 5553756, Hang-Up Button (Red Handset key)

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status - 8 on Some), Left Display Button (left MENU key), 7684666, Hang-Up Button (Red Handset key)

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over. (see RX and RXAM)

LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level

POWER table

PL: 5 6 7 8 9 10 11 12 13 14 15

dB: 33 31 29 27 25 23 21 19 17 15 13

Watts : 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02

LF* C1 value with continuous transmission from tower

LS* C1 Value with discontinuous transmission from tower

QF* Bit Error Rate with continuous transmission from tower

QS* Bit Error Rate with discontinuous transmission from tower

BER (bit error rate) table

QF/QS register: 0 1 2 3 4 5 6 7

% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Siemens S1/S3

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.

Turn the phone on. Enter PIN. Before the telephone has logged in to the your GSM net do the following steps.

1: Choose F 9 (function settings)

2: Choose send own number and push the right button for choose.

3: Push 9

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.

Siemens S3 Comfort

MONITOR MODE

The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

TO ACTIVATE MONITOR MODE:

Turn the phone on.

Enter the PIN access code on press OK. (Only if is enabled).

Press Menu. (Left top button).

Press 9. (Phone Options).

Press 8. (Phone Status) (May be button 7 in some phones).

You may see your IMEI Number

Left Display Button (Top left MENU key).

7684666

Hang-Up Button. (Red Handset key).

Note: Monitor should appear now at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Siemens S4/S4 Power

In phonebook under "Own Phone No." enter +12022243121 (which is the number to the White House) and you'll get a greeting from the people who programmed the phone.

MONITOR MODE

The Siemens S4 series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

TO ACTIVATE MONITOR MODE:

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 7684666, Hang-Up Button (Red Handset key)

Now "Monitor" should appear at the bottom of the Network Options menu.

Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

--------------------

CH Channel Number

RX Signal Strength (dB)

N NCC (Color Code)

B BCC (Color Code)

CI Cell ID (in Hex)

C1+ how long before phone does forced hand over. (see RX and RXAM)

LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Reeceive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level

Power Table

PL: 5 6 7 8 9 10 11 12 13 14 15

dB: 33 31 29 27 25 23 21 19 17 15 13

Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02

LF* C1 value with continuous transmission from tower

LS* C1 Value with discontinuous transmission from tower

QF* Bit Error Rate with continuous transmission from tower

QS* Bit Error Rate with discontinuous transmission from tower

BER (bit error rate) table

QF/QS register: 0 1 2 3 4 5 6 7

% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Siemens S6/S10

In Phonebook, store as your own number: +12022243121

Then you get the sun and two palms in the display, also a greeting message of the "MMI-team".

It has been said that the phone number is the number of the Capitol building in Washington, DC (but not sure).

Siemens S15 Secret Menu's

Press * -> # -> 7 -> 4 -> 3 -> 6 -> 3 -> 6 -> 7 -> * -> 8 -> 3 ->

7 -> 8 -> # ,press clear key to clear screen and return to

stand-by mode

press Menu, it will show additional menu

Menu 3.3.4 Band selection,

Menu 3.3.4.1 Automatic band selection,

Menu 3.3.4.2 select GSM 900 only,

Menu 3.3.4.3 select GSM 1800 only,

Menu 10 Engineering,

Menu 10.1 MS info,

Menu 10.2 software detail,

Menu 10.2.1 software version,

Menu 10.2.2 EEPROM version,

Menu 10.3 Test/production details

Menu 10.3.1 Hardware deta

Menu 10.3.2 production deta

Menu 10.3.3 Service deta

Menu 10.3.4 Mechanical deta

Menu 10.1.1 MS info on, then on the screen show these, for example:

FCN RXL C1 C2

642 011+11+91 -> PAGE 1

CID DSC CB

11211 045 000 -> PAGE 2

BCC NCC TN

000 002 00 -> PAGE 3

RXf RXs RQf RQs

00 00 00 00 -> PAGE 4

ATa APa Hn Hf

001 000 05 00 -> PAGE 5

DTU DTD HP CI

+ ? - - -> PAGE 6

MM CC RR

IdNS Nul Idl -> PAGE 7

<TOPIC MERGED!>

Edited by Vishal Gupta

Share this post


Link to post
Share on other sites

Good searching man. Trouble is that these codes are usually changed (especially the programming codes) for every region. So none of them work with Indian/RIM handsets. Thus rendering all your efforts useless.

Share this post


Link to post
Share on other sites

Those codes are old and have been posted before also on this site but they are not useful in any way except some of them

Share this post


Link to post
Share on other sites

can anyone tell me the codes (All sort of) for Lg RD2230 &Nokia 2280

wat all can be done with the codes can u edit some nam settings to make something gud out of it

wat all can be done by vhanging these settings.

i read some where that the calls to emergency no's are free wat if i hardcode a no as an emergency no in NAM1 settings? wat do u say it will work? or not?

plz reply soon

waiting to hear from you guys soon

Share this post


Link to post
Share on other sites

naa ... change the emergency numbers to any number u choose, but the billing happens from the MSP's backend .. (frm reliance in this case) so it will not be a free call ...

(else do u think anyone would have gone for the free rim2rim schemes ??? for all i know, u would just hardcode the number of ya gal onto the hs :Equivocado: )

well .. so that blanks out that question

Share this post


Link to post
Share on other sites
naa ... change the emergency numbers to any number u choose, but the billing happens from the MSP's backend .. (frm reliance in this case) so it will not be a free call ...

(else do u think anyone would have gone for the free rim2rim schemes ??? for all i know, u would just hardcode the number of ya gal onto the hs :Equivocado: )

well .. so that blanks out that question

i tried that in my nokia 2280 but the emergency no cant be more than 8 digits so no ordinary phone no can be entered in that feild(as i believe or may be its just my nokia 2280)Wat i was planning was something to mess up with 1234(rs.6/min==>somebody bring me Glucose!!!).

Share this post


Link to post
Share on other sites

Can some one tell me what is the OTKSL no. From where I can find that

Vishal

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×