Leaderboard

The new Nexus 6 is very easy to program. RGERUC and RECRUC068 work out of the box on this device. Data needs simple steps by DFS. Required:- Latest Motorola BP drivers, DFS Not required:- Root, bootloader unlock 1. Boot the phone into BP tools and select port "diag mdm" with no SIM inside and airplane mode turned on. 2. Make RTRE config to RUIM pref and reboot back to BP tools (can make it RUIM only after programming is complete) 3. Write omhxxx in ppp usr and S1912xxx in ppp password 4. Continue in data section in DFS, HDR SCP force AT config= RevA_MFPA HDR SCP force rel 0= Evdo_RevA Hybrid mode=enable Data MDR HSPD mode= MDR only 5. Insert RGERUC SIM and continue programming 5. Enable all six profiles in MIP section and write omhtestxx in all the six fields with MIP=Mobile IP 6. Reboot and enjoy.

Sprint and Verizon both work. Verizon could be better. Both will support all LTE bands of !dea, Vodafone and Airtel including Jio. Sent from my K016 using Tapatalk

Sent from my Redmi Note 3 using Tapatalk

The process is more or less similar to that of htc one m7. So for those who already unlocked sprint htc one m7 this should be familiar. Requirements: 1. This tutorial is independent of Android version whether it may be 4.4.2 or 4.4.3. Works on both stock and sense based custom ROM's. (Not tested on AOKP ROM's.). Works on both s-off and s-on devices. 2. You need to be rooted and bootloader needs to be unlocked. Here are the links that would show you how to do it. http://theunlockr.com/2014/04/19/root-htc-one-m8-all-in-one-toolkit-method-video/ '> https://www.dropbox.com/s/74r6h5q6ft50z6j/SIM_UNLOCK.zip?dl=0 '> https://www.dropbox.com/s/74r6h5q6ft50z6j/SIM_UNLOCK.zip?dl=0 4. Download and install Terminal from play store. 5. Switch off the handset and boot to fastest.(By holding volume down and power button together ). 6. Once you are on fastboot screen navigate to recovery using volume buttons and press power button to boot to recovery. 7. One you are in recovery click on install (I'm presuming you installed twrp recovery, if not then do it according to that recovery). Now locate SIM_UNLOCK. zip and flash it. Reboot system after successful flash. 8. On Reboot:Open the Terminal Emulator from the app drawer 9. Type - su 10. Hit enter on your keyboard 11. After you see the # type this- am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity 12. Hit the enter key 13. Next you should see a menu listing 3 options as follows: GUI API ROAMING OPTIONS 14. Select API 15. Once the API menu comes up, scroll down until you see - sim lock 16. Tap- sim lock. Wait until the gray highlight goes away and turns black again 17. Reboot and you are done. 18. If you see you that you have no network then dial *#*#4636#*#*. A menu will pop up. Select phone information then scroll down until you see 'select preferred network type'. Change it to WCDMA preferred and that is. Now your network should pop-up. This is permanent unlock and you can update your Android version in future. Thank you.

I have uploaded newer versions of qpst and qxdm in software section. Both these tools give errors on Windows. @Ankit bhai, you have to use sika shortcut maker.apk or shortcutmaster_lite_modded_LS990.apk to pull up apns settings. Do not try to change GSM cellular bands from *#*#4636#*#* or will lose signal. I will put HSPA 3G UMTS band unlock tutorial for xt1055 and xt1093 shortly. Motorola has many diag mode ports like mot qc diag port, Motorola BP diagnostic port, Motorola usb diag port etc but phone's modem responds to only one diag port out of these. Also make sure adb is enabled with pc RSA key authentication. Auto APN for GSM UMTS on xt1093. Sent from my K016 using Tapatalk

You cannot restore NVRAM data on any phone to enable internet. Make it NV only, write Ppp username =omhtest@omh.relianceinfo.com and S1912xxxx as Ppp password. Write omhtest@omh.relianceinfo.com in all six profiles in MIP section with pref mobile ip. Reboot and make it ruim if available. If data does not start due to some other issue, use RGERUC SIM.