Leaderboard

Requirements:- QXDM Not Required:- Root, Bootloader unlock Steps:- Part I:- GSM edge unlock 1. Select LTE from mobile networks settings. Remove SIM and switch off phone 2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging 3. Map the comports correctly to QXDM 4. Airplane mode 5. In QXDM, open command prompt, type spc=000000 6. Open NV browser, look for item 441 and make it 0x383 or 0xFFF in band line, click write 7. Look further for NV item 946, write 0x0028 in band pref 8. Lastly item no 1877 and write 2622339 to rf_bc_config line 9. Reboot 10. Phone now boots in global mode, insert GSM SIM and use with EDGE data. CDMA section remains untouched. Part II:- 3G HSPA+ UMTS 2100 mhz unlock (part II only after getting Edge signal) 1. Select LTE from mobile networks settings. Remove SIM and switch off phone 2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging 3. Map the comports correctly to QXDM 4. Airplane mode 5. In QXDM, open command prompt, type spc=000000 6. NV item 946, write 0x0EA8 in band pref 6. NV item 1877 and write 245891456 to rf_bc_config line 7. Full flash current firmware by fastboot with emphasis on fastboot erase modemst1, fastboot erase modemst2 8. Phone boots in global mode with HSPA+ Note:- Firmware flashing will remove unstable signal issue. All the changes will be permanent. CDMA/evdo remains as it was earlier.

Circles in which Jio does not have 1800 Mhz and RCOM+MTS having only 5Mhz spectrum in 800. RCOM will close CDMA operations Eg Punjab, UP W, Bihar, J&K... Just my guess

The new Nexus 6 is very easy to program. RGERUC and RECRUC068 work out of the box on this device. Data needs simple steps by DFS. Required:- Latest Motorola BP drivers, DFS Not required:- Root, bootloader unlock 1. Boot the phone into BP tools and select port "diag mdm" with no SIM inside and airplane mode turned on. 2. Make RTRE config to RUIM pref and reboot back to BP tools (can make it RUIM only after programming is complete) 3. Write omhxxx in ppp usr and S1912xxx in ppp password 4. Continue in data section in DFS, HDR SCP force AT config= RevA_MFPA HDR SCP force rel 0= Evdo_RevA Hybrid mode=enable Data MDR HSPD mode= MDR only 5. Insert RGERUC SIM and continue programming 5. Enable all six profiles in MIP section and write omhtestxx in all the six fields with MIP=Mobile IP 6. Reboot and enjoy.

Sprint and Verizon both work. Verizon could be better. Both will support all LTE bands of !dea, Vodafone and Airtel including Jio. Sent from my K016 using Tapatalk

Reliance CDMA with data is working on Redmi note 3 16Gb which I just got from 23rd March sale. Sent from my Redmi Note 3 using Tapatalk