-
Content count
4,214 -
Joined
-
Last visited
-
Days Won
212
Posts posted by ::Hitesh::
-
-
^^^
I have replied to your PM with same query. check PM.
for every one who did wipe and have no system on phone.
Use OTG cable or OTG pen drive to flash zip via recovery.
or you can push zip to phone via ADB while phone in recovery mode.
-
Ones process is completed, freeze those apps using ROM tool box or any root app which can freeze apps.
You don't need them.
-
Contact Motorola service center. Looks like battery totally totaled..Handset: Moto G (XT 1033) 16GB; Android version: 5.0.2; FlipKart Purchase: 02-March-2014 (out of Warranty)
Problem: my Moto G has suddenly become "Blank" while on normal use and doesn't respond to Power button.
I have tried the following:
1. Pressed & held the Power button for 7-10 seconds, NO Response.
2. Pressed & held the Power Button for a full 120 seconds while connected to a charger (powered up), Only the Notification-LED blinks once after 7-10sec and also after 120 seconds.
3. Device powered off, and unplugged; Pressed & held the Volume-Down button and Power-button for approximately 3 seconds then released, No Response.
4. Connected the Charger For 5Hrs.(powered up) and repeated steps 1,2 & 3 - No response.
Pls. advice
thanks & regards
-
^^^
Tried 3.1v of Bliss pop, works fine. Shows operator as "roaming indicator off"
Further don't post about custom ROM here, this is for soak test.
Will create now topic for moto g custom ROMs
- 1
-
^^^
Custom roms are available in XDA, I am using / testing codyf86 experimental ROM, none of custom ROM can be and will be fully stable. So stick to stock only. Custom ROM are not for everyone.
Evey 2nd day updates are thrown that too 250+ mb.
Right now you can try same codyf86 experimental ROM on xda.
-
^^^
Look on Amazon, summer special is going on
-
^^^
We are not getting 5.0.2 stock, right now only available is soak test 5.0.2.
Moto G boost will get 5.1 ota.
I am using 5.1.1 custom.
-
You need to fully wipe your phone before installation.having boot problem after update , it shows the message of updating services but again reboots and so goes on it won't start , keeps on rebooting , i tried reverting back to old stocks but same is happening in other stocks also , can you suggest something wher have i done wrong or is something missing ?
This happens when data is not wiped.
Final roll out won't happen , as Motorola will be pushing 5.1 soon.
You are talking about the soak test or the stable final rollout?Did anyone get this update OTA?
Yes, the final rollout? Did it start?
-
Turn off assisted dialing in shown pic. No other option in phone.
For other issue refer link to HFA and tether setting given in first post of this topic.
- 1
-
@KD do agree that more modifications are required, but as of now this is sufficient for few hr of weekly use
Sent from my XT1031
-
^^^ it won't, as this board is known for lowest heat , also added one 80mm fan on top cover to pull heat out.
Sent from my XT1031
-
Here are few more pics
Its my shoe box PC with below configuration
1- Atom 1.6ghz with Nvidia ION chip set
2- 1TB HDD
3-few GB of RAM
4- normal SMPS
All fitted in a shoe box
Actually wanted to buy itx cabinet , but cost of good itx cabinet is approx 3-4 k.
Dont want to spend that much for 1kg metal box.
So decided to do something by my self.
Didn't had time to design and fabricate custom box.
So one day saw a shoe box laying around. And was perfect fit for minimum requirement for my rig.
This is just an amateur PC box.
Sent from my XT1031
- 8
-
Nahi aalok Ji, this box will be used in my home.
Sent from my XT1031
-
@Pkc19. Everything u need is posted in this topic , kindly do read this topic very carefully
Sent from my XT1031
-
Hint - there is one button on front side, left side a fan, back side few connectors.
Sent from my XT1031
-
Just finished doing this small home made thing ..... Took only 15min.
Any guess ...what's in the box ?
- 3
-
@mcnu, yes you can but only without updating modem and boot loader.
If you wish to update including modem. Then you need to flash 4.4.4 modem updator then 5.0.2 modem updator.
If done with modem updator you need to do prl and dump again.
For all you need custom recovery.
Sent from my XT1031
-
^^^
do settings as per below pic.
Ibhave read that ART runtime (whichbia default in Lollipop) would take up more space than the dalvic. Does this means the free space we have would be even less than Kitkat? And as such Moto G has just 8gb.
This is true. but only system space will be less compare to kitkat, remaining storage will be as it is. you wont find any major difference.
-
^^^
After 4.4.4 update spc utility stopped working. And for boost or Verizon moto g SPC is NOT zero by default.
For Verizon few people were able to read spc in dfs by following method.
1- boot phone with BP tool option in boot loader
2-dial ##626 and enter any numbers
3- connect phone to PC with correct diag drivers
4- open dfs and in spc section click read.
This is not tested by me .
-
@HP Done !
-
∆∆∆
If you want to flash on ROM then no issues, if you want 5.0.2 radio then u have to flash 4.4.4 partition updater first then 5.0.2 partition updater, u don't have to update system to 4.4.4
-
If u take ota , u need to do PRL and DATA only. Everything will work normally then.Hi Hitesh,
I'm on 4.4.4 not rooted/bootloader unlocked. Whether doing an OTA update requires any more work other than the PRL and DATA update?
@daleksec3208
That whybi have suggested to use twrp 2.7.1.1 . twrp 2.8 makes your phone as xt1032 in recovery.
I wanted to add a few things for people that might of been in the same boat as me when trying to install this. I went to install this zip with TWRP version 2.8.5.0 which was for the titan version of the moto G I believe. So upon trying to install, I got the error "cant update binary zip, this is for xt1031,1032,1033 etc..." . So I actually had to go into the binary update and manually change "xt1031" to "titan", in both the spots that you see it in. (its only in the first line) from there it seemed to be fine. Though it stayed on the bootloader unlocked screen for about 15 mins until i held down the power button and then it magically came on with what seemed like no problem. I've been using it all day so far and haven't noticed one bug. Data and calling worked out of the gate. Also, I'm using my phones tether to send this at the moment. And that is without flashing the other modem or changing anything to the modem. Thank you very much for this ROM. I have tried a bunch and they didn't compare to this one.
- 1
-
As a request from member posting this zip here.
https://www.dropbox.com/s/qgm87ne8botjg6j/explorer.zip?dl=0
Flashing this zip in recovery , you will get es explorer in phone. No need to download again from play store .
This will help installing or restoring apps you backup earlier.
-
^^^
Many users used wrong PPT to reload PRL after OTA.
So now only PRL and DATA PPT is public.
if you want full PPT will unlock it .
[Tutorial] Update Boost Moto G to 5.0.2 [lollipop]
in Motorola
Posted · Report reply
Update -
Here is only bootloader update zip, without modem.https://www.androidfilehost.com/?fid=23991606952597399
Using this flicker issue will solve and also as modem is not included, so no need to reprogram phone.