-
Content count
42 -
Joined
-
Last visited
Posts posted by Gdeepp Sran
-
-
@atishj
i think not yet bro jio work on a app which will work in 3g handset .........speed willbe like as 4g .............so see what will happen
-
mail me dear gdeepp@gmail.com
-
-
32 minutes ago, ezeuba said:I saw the firmware on the Chinese site but could not make out how to download from there. If you still have this firmware, please kindly upload to Google Drive or somewhere else and kindly share the link. I would like to try it too. Also, what is the outcome of your flashing? Are you unlocked now? Thanks.
was download it and flash it but same result ............no network and ask for unlock code ................. after i convert my xt1093 to t- mobile pure xt1095 same .there no service and ask for unlock code so what is wrong dont know thanks
-
On 10/8/2016 at 3:42 PM, dr.faramroze said:A direct method of GSM-4G LTE network unlock without changing values is shown on this forum here. http://bbs.gfan.com/android-8010401-1-1.html It has GPT.bin, NON-HLOS.bin and FSG.mbn from ATT Victara 5.1. The author has uploaded a modified USC Victara 5.1 firmware.xml here. http://pan.baidu.com/s/1o6ED4l8 I assume no responsibility of any content on any other forums. Flash according to your own will.
Helo DR.Faramroze how can we download it want to try it please help ...........and only flash GPT.bin, NON-HLOS.bin and FSG.mbn from ATT Victara 5.1 ,.......these file and got (gsm global mode ) unLock .and no need modify nv thanks
-
DEAR Bro @
drmadhu
bro which sim card is coming with jio handset they are also register handset IMEI so they will not work with other handset ........ directly
-
-
On 23/3/2016 at 4:40 PM, dr.faramroze said:Requirements:- QXDM
Not Required:- Root, Bootloader unlock
Steps:-
Part I:- GSM edge unlock
1. Select LTE from mobile networks settings. Remove SIM and switch off phone
2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging
3. Map the comports correctly to QXDM
4. Airplane mode
5. In QXDM, open command prompt, type spc=000000
6. Open NV browser, look for item 441 and make it 0x383 or 0xFFF in band line, click write
7. Look further for NV item 946, write 0x0028 in band pref
8. Lastly item no 1877 and write 2622339 to rf_bc_config line
9. Reboot
10. Phone now boots in global mode, insert GSM SIM and use with EDGE data. CDMA section remains untouched.
Part II:- 3G HSPA+ UMTS 2100 mhz unlock (part II only after getting Edge signal)
1. Select LTE from mobile networks settings. Remove SIM and switch off phone
2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging
3. Map the comports correctly to QXDM
4. Airplane mode
5. In QXDM, open command prompt, type spc=000000
6. NV item 946, write 0x0EA8 in band pref
6. NV item 1877 and write 245891456 to rf_bc_config line
7. Full flash current firmware by fastboot with emphasis on fastboot erase modemst1, fastboot erase modemst2
8. Phone boots in global mode with HSPA+
Note:- Firmware flashing will remove unstable signal issue. All the changes will be permanent. CDMA/evdo remains as it was earlier.
hello Dr.faramroze was try to unlock my moto x2 for GSM but no success ......when restart its show Roming sign on signal bar after it disappear .also on lolipop 5.1 data not work for MTS normal or RG type sim .(on 4.4 its work with normal sim)......is GCpro key unlock stock ROM for gsm sim ........... or can we unlock boot loader and flash indian X2 rom for gsm unlock ........... and please sir advise me is GCpro key is unlock mostly lg htc samsung handset its worth for money sir or z3x is best for making TOT file or unlocking sir ......please reply thanks
-
5 hours ago, dr.faramroze said:This is the qcn backup of a GSM unlocked Moto X 2nd gen US Cellular XT1093. Can read the contents thru qcn view for necessary changes to be made.
hello sir can i flash your QCN file in my handset ???????????? what will be wrong if i flash sir and GSM unloking need lolipop or also work in 4.4 thansk .........and Qcn view show has many difference in my QCN backup compare yours
-
On 23/3/2016 at 4:40 PM, dr.faramroze said:Requirements:- QXDM
Not Required:- Root, Bootloader unlock
Steps:-
Part I:- GSM edge unlock
1. Select LTE from mobile networks settings. Remove SIM and switch off phone
2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging
3. Map the comports correctly to QXDM
4. Airplane mode
5. In QXDM, open command prompt, type spc=000000
6. Open NV browser, look for item 441 and make it 0x383 or 0xFFF in band line, click write
7. Look further for NV item 946, write 0x0028 in band pref
8. Lastly item no 1877 and write 2622339 to rf_bc_config line
9. Reboot
10. Phone now boots in global mode, insert GSM SIM and use with EDGE data. CDMA section remains untouched.
Part II:- 3G HSPA+ UMTS 2100 mhz unlock (part II only after getting Edge signal)
1. Select LTE from mobile networks settings. Remove SIM and switch off phone
2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging
3. Map the comports correctly to QXDM
4. Airplane mode
5. In QXDM, open command prompt, type spc=000000
6. NV item 946, write 0x0EA8 in band pref
6. NV item 1877 and write 245891456 to rf_bc_config line
7. Full flash current firmware by fastboot with emphasis on fastboot erase modemst1, fastboot erase modemst2
8. Phone boots in global mode with HSPA+
Note:- Firmware flashing will remove unstable signal issue. All the changes will be permanent. CDMA/evdo remains as it was earlier.
hello Dr. Sir i have moto x2 US Cellular so i change nv in QXDM after reboot its didn't show signal as it was before as asking for UNLOCK CODE show same POPUP after nv change i checked again all nv there were changed as u said and stick so please help it have android 4.4 ................. I have another moto x2 us cellular with android 5.1 i want to use BOTH on GSM ............... CDMA work fine in both sir thanks
-
On 29/6/2016 at 0:20 PM, dr.faramroze said:These files have been given by a group. They have not provided any guide to unlock these phones. Install shortcut master and go to phone app and select global mode. Apart from making it spr in build.prop, itsonUID has to be terminated and the G4 carrier files mod has to be done like this https://cdmatool.ladesk.com/379711-LG-G4-Sprint-Sim-Unlock
Hello Dear Dr.Faramroze my tribute 5 didn't stick to Global Mode as u said All did successfully but got this problem all time change in SMaster (Phone)seting change to globle it show network but in network setting it show CDMA or LTE CDMA so please help (Home oprater in Build prop is Chamel..and Numaric is 000000)
-
4 hours ago, azsrockz said:Yea i came to know that later Gdeepp, but i am already passed that, i have a stock working rom right now.
The problem now is my phone isnt recognized by my pc or my laptop (win xp and win 10). It just shows charging, i have all the necessary drivers, htc sync manager installed. Still it doesnt help, i changed usb ports as well as usb cables, nothing happens.
UPDATE: I flashed stock recovery, stock boot, and relocked bootloader, factory reset from the bootloader, and the problem got fixed. phone was being recognized by my laptop. so i started with the procedure again step by step, but after rooting, i.e flashing the supersu zip through recovery, the phone boots up with the same problem, not being able to be recognized by my laptop.
UPDATE 2: The problem was of the custom boot.img I flashed another boot.img and the phone was being recognized by my laptop. Thanks for your help. I successfully completed the procedure but the warning of insert a new Sprint SIM shows when the device boots up. Is that normal? I don't have a cdma SIM with me rn. I live in India and I have Vodafone and airtel. Is reliance and Tata DoCoMo the only cdma providers in India? Thanks again.
where from u dear which state dear RIM is close now ONLY MTS TATA AND BSNL IS Avail so see locally which one is available
-
11 hours ago, azsrockz said:The ruu fails to install. it says in bootloader "security fail ruu" i then rebooted the phone and nothing changed. the dialer problem still exists. my phone is the sprint variant and i have downloaded the correct sprint 510 ruu. the recover update option in the ruu gave me no luck. tried it few times and it still shows the security fail ruu. i have unlocked bootloader and twrp and root, does that effect the process? thanks a lot
UPDATE: i managed to get a stock twrp backup and get to work the DM on with the dialer. Now i am stuck at step 6. the DFS is not showing htc diagnostic port. also my phone is connected via the usb to my laptop, but on the phone it only shows charging, no storage sharing/mtp options, its just charging. though with the same usb cable and usb port my phone is recognized in fastboot mode, but not when it is turned on, i have installed htc sync manager but nothing works. any help? thanks
Bro botloader should be relock or locked when flash RRU
-
9 hours ago, vipsy6 said:I have already did that. I think it's the lgdmsclient which needs to be remaned to origianl state as it was been renamed previously for CDMA to stop handsfree activation. Had faced same issue with G3. I realized this after I posted my last post in evening. Phone is not with me as of now. I will try tomorrow morning and update here.
Edit 1: Renamed LGDMSClient. No success. Noticed that, global mode doesn't stick. Once select Global and go back it automatically gets back to CDMA/LTE.
Edit 2: I am able to get "No Service" instead of "Service disabled" after selected Network mode to LTE/GSM/UMTS from com.lge.networksettings.Systemselect
u can try a rest RTN ##72786# it can help dear or change sim card and reply
-
2 hours ago, vipsy6 said:Thank you @Gdeepp Sran @dr.faramroze
At least now sim is getting detected instead of "invalid sim". I have selected network to global mode, but shows service disabled on lock screen. Please refer the pic & advise.
can u paste node.bd ...... file in carrier folder as we did in G4 and tribute 5
-
4 hours ago, vipsy6 said:I have tried too but shows invalid sim. Any suggestion ?
can u try SPR to spr method in edit build prop ............. build.target its need root
-
15 hours ago, dr.faramroze said:LG stock firmware links for public download.
LG Tribute 2 LS665 TOT w dll:- https://docs.google.com/uc?id=0B_Hol5T47S-baExha2dCWThrQTQ&export=download
LG Tribute 2 LS665 bin firmware:- http://www.4shared.com/archive/b3TqOMtgce/pro_yemen_ls665.htm
LG Stylo LS770:- https://www.androidfilehost.com/?fid=24533100289589827
https://www.androidfilehost.com/?fid=24545065934258674
LG Tribute 2 GSM Unlock:- http://www.4shared.com/zip/le0cW_7Ace/LG_LS665_unlock_SIM_DIAG-Arab_.htm
LG Stylos LS770 GSM Unlock:- http://www.4shared.com/zip/7OK7kD3Xce/Root-and-unlock-LG-LS770-Arab-.htm
File share courtesy:- Yemen CDMA Team
Sent from my K016 using Tapatalk
hello every buddy anyone try it i just try to unlock ls665 tribute2 all did fine but not unlock for me help me if its work for GSM its show invalid sim and how to change CDMA to GSm in network no option for GSm there thanks
-
Hello all I have zte warp sync n9515 got SPC from BOOSt but its didn't stick on RUIM mode so please help i did ##72786# but no luck its revert back to nv only and in Mobile Ip ......Simple ip ..... stick data can work on normal sim thanks
-
On 3/31/2016 at 11:38 PM, vahidmomin said:On 3/23/2016 at 8:14 PM, dr.faramroze said:GSM with 3G HSPA+ unlocked on LG Tribute5 LS675 using SPR LS990 method after root with Kingroot 4.8.3.apk. After placing node.db file in carrier folder, look for the cust.prop and edit the lines ro.cdma.home.operator to Chameleon and ro.numeric to 000000. Save and exit. This will bring GSM/UMTS selection option in mobile networks settings. Do not rename or delete any system files in Tribute 5. Only freeze them by de-bloater pc app. Do not unroot after GSM unlock process. To be safe, take a qcn backup in qpst before beginning this process.
Sent from my K016 using Tapatalk
was try this 1st root tribute 5 and than change in build prop build.target SPR to spr ts work on GSM AND CDMA as well with data all type SIM card work but on GSM my one is show EDGE network only any buddy help thanks ..............after change sim GSM 3G work well thanks
-
Don't know about LTE version, but boost prevail didn't had sim slot when last time I seen.Guys can Boost Mobile Samsung prevail lte will work on Reliance cdma
Sent from my LG-LS740 using Tapatalk
Sent from my Moto G using Tapatalk
Boost Samsung Prevail LTE works on normal SIM, RGERUC and any other CDMA SIM cards. It is the same model G360P based on Sprint Core Prime. It shares the same firmware. Virgin Core Prime also works on all SIM cards. Verizon Core Prime has trouble configuring data and data works only on some few RGERUC SIM cards. There is no GSM on Verizon model.
Was bought a galaxy prevail LTE SM G360P boost mobile
How can i unlock it .Its detect my MTS sim but show invalid sim thanks
-
hello all galaxy s5 (Sprint )(G900P) user anybody have Debrick .img for galaxy s5 g900P i need it if any buddy on lollipop 5.0 u can create your self and send me gdeepp@gmail.com
how to make Debrick .img
You need to be rooted and have busybox installed!
Simply run this command as root and upload the image to me
busybox dd if=/dev/block/mmcblk0 of=/sdcard/200MB.img bs=4096 count=50000if = not work then use - instead of =
thanks
-
hello all galaxy s5 (Sprint )(G900P) user anybody have Debrick .img for galaxy s5 g900P i need it if any buddy on lollipop 5.0 u can create your selp and send me gdeepp@gmail.com
how to make Debrick .img
You need to be rooted and have busybox installed!
Simply run this command as root and upload the image to me
busybox dd if=/dev/block/mmcblk0 of=/sdcard/200MB.img bs=4096 count=50000if = not work then use - instead of =
thanks
-
hello all HTC desire 510 user i just bought and unlock it for CDMA ....sim work fine and just insert a GSM sim in it.... its show sim sms and contact and sim toolkit in menu like as show CDMA sim so i thing GSM radio need .... any buddy have a gsm RADIO IMG for 510 like cricket and another gsm 510 thanks
-
Is your meid is registered in reliance??
Sent from my iPhone 6 using Tapatalk
Is your meid is registered in reliance??
Sent from my iPhone 6 using Tapatalk
Is your meid is registered in reliance??
Sent from my iPhone 6 using Tapatalk
no sir not yet i use just as i podIs your meid is registered in reliance??
Sent from my iPhone 6 using Tapatalk
I have same model with register meid but i m also using as IPod.
Coz i dont hav HCC to transfer my number.
I dont have documents to get number transfer from webworld.
Sent from my iPhone 6 using Tapatalk
and there is no way to use it on ruim mode ..... we can not do any thing with it via Z3X or RIFF ................and can we change its Mother borad with sprint and Verizon or US Cellular s4 thanks
Will this imported CDMA phone work with RUIM of indian Operators?
in Technical / OS related
Posted · Report reply
mail me ...........gdeepp@gmail.com ..... it will also work for call dear