Connect To Internet Without Rconnect Dialer On Any Window Based Operating System (vista Also)

[manubatham2006 0]

You need only usb cable drivers to run the net on windows vista. And in the case of serial cable u don't need any driver. Follow the following steps-

1.Go to Control Panel.

2.Open Phone and Modems,

3.Now go to modems, Click on add, and add 33600 or 28800 modem type from standard modem type on COM1(Serial Port)

4.Open its property and set the modem speed to 115200.

5.Remember u have to set this speed everywhere. i.e. serial port speed, modem speed, connection speed etc.

6.Now close this all and Open My Network Places,

7.Click on View network connections.

8.Create new connection->Connect to internet->Setup my connection manually->Connect using a dialup modem->chooose ur modem (which u recently installed on COM1)

9.Give connection Name anyone which u want and dialing number #777.

10.Give ur number in ur username and password, and finish it.

11.Open this connection and goto property.

12.Set the speed of the connection at 115200.

13.Click on Ok.

14.Now u r ready to dial.

15.Dial and u get connected to internet.

16.Thus u don't need any driver with serial cable and need only usb cable driver in the case of usb cable. If any problem persists, reply here.

[Kunal Hemrajani 1]

lol..

we r already usin internet..widout installing the R-connect dialer..

so wotz new in that..

anyways the step by step procedure u hve given..wud b helpful for sum ppl..

[raams 0]

You need only usb cable drivers to run the net on windows vista. And in the case of serial cable u don't need any driver. Follow the following steps-

1.Go to Control Panel.

2.Open Phone and Modems,

3.Now go to modems, Click on add, and add 33600 or 28800 modem type from standard modem type on COM1(Serial Port)

4.Open its property and set the modem speed to 115200.

5.Remember u have to set this speed everywhere. i.e. serial port speed, modem speed, connection speed etc.

6.Now close this all and Open My Network Places,

7.Click on View network connections.

8.Create new connection->Connect to internet->Setup my connection manually->Connect using a dialup modem->chooose ur modem (which u recently installed on COM1)

9.Give connection Name anyone which u want and dialing number #777.

10.Give ur number in ur username and password, and finish it.

11.Open this connection and goto property.

12.Set the speed of the connection at 115200.

13.Click on Ok.

14.Now u r ready to dial.

15.Dial and u get connected to internet.

16.Thus u don't need any driver with serial cable and need only usb cable driver in the case of usb cable. If any problem persists, reply here.

thanx for the information . I've made dial-up connection with my 6275 .

For Tata Indicom Dial #777

Username & password(both) : internet

[hemanthada 0]

Dear

Where is the drivers for vista?

Please send me the link for the drivers that could run my modem on vista?

You need only usb cable drivers to run the net on windows vista. And in the case of serial cable u don't need any driver. Follow the following steps-

1.Go to Control Panel.

2.Open Phone and Modems,

3.Now go to modems, Click on add, and add 33600 or 28800 modem type from standard modem type on COM1(Serial Port)

4.Open its property and set the modem speed to 115200.

5.Remember u have to set this speed everywhere. i.e. serial port speed, modem speed, connection speed etc.

6.Now close this all and Open My Network Places,

7.Click on View network connections.

8.Create new connection->Connect to internet->Setup my connection manually->Connect using a dialup modem->chooose ur modem (which u recently installed on COM1)

9.Give connection Name anyone which u want and dialing number #777.

10.Give ur number in ur username and password, and finish it.

11.Open this connection and goto property.

12.Set the speed of the connection at 115200.

13.Click on Ok.

14.Now u r ready to dial.

15.Dial and u get connected to internet.

16.Thus u don't need any driver with serial cable and need only usb cable driver in the case of usb cable. If any problem persists, reply here.

[mozilla 0]

Dear

Where is the drivers for vista?

Please send me the link for the drivers that could run my modem on vista?

------------

Dude,

select the driver based on ur device & OS using the below link

http://www.rcom.co.in/webapp/Communication...arddownload.jsp

[SweetRichi_Ric 0]

You need only usb cable drivers to run the net on windows vista. And in the case of serial cable u don't need any driver. Follow the following steps-

1.Go to Control Panel.

2.Open Phone and Modems,

3.Now go to modems, Click on add, and add 33600 or 28800 modem type from standard modem type on COM1(Serial Port)

4.Open its property and set the modem speed to 115200.

5.Remember u have to set this speed everywhere. i.e. serial port speed, modem speed, connection speed etc.

6.Now close this all and Open My Network Places,

7.Click on View network connections.

8.Create new connection->Connect to internet->Setup my connection manually->Connect using a dialup modem->chooose ur modem (which u recently installed on COM1)

9.Give connection Name anyone which u want and dialing number #777.

10.Give ur number in ur username and password, and finish it.

11.Open this connection and goto property.

12.Set the speed of the connection at 115200.

13.Click on Ok.

14.Now u r ready to dial.

15.Dial and u get connected to internet.

16.Thus u don't need any driver with serial cable and need only usb cable driver in the case of usb cable. If any problem persists, reply here.

Not worked form me, I'm using LG RD 2030....

[copperco2 24]

i guess, the older models will require the r connect software...

could be because thats an ancient tech.. 2030

[kshah 452]

This applicable for handsets which can be identified as standard modem not all handsets will work. New handsets may not work.

[yunus 0]

Not worked form me, I'm using LG RD 2030....

It had worked for me on windows XP. Haven't tried on Vista though. BTW which cable r u using? Serial or USB ?