Jump to content
Reliance Jio & Reliance Mobile Discussion Forums

Jat

Members
  • Content count

    6
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Jat

  1. Steps for Diagnostic Mode and getting Reliance CDMA 1. Install drivers and unlock the bootloader and root the device. I use Unified_Android_Toolkit (link : http://forum.xda-developers.com/showthread.php?t=2525026 ) 2. Get the MSL/SPC code Here are the steps : 1. Connect your phone to your computer, with USB Debugging enabled. 2. Open a command terminal, change directory to wherever you have the Android SDK's platform-tools installed. 3. Enter "ADB devices" to ensure your device is properly connected. This should print your device's serial number. 4. Enter "ADB logcat" to print the device log. At this point the terminal window will start vomiting up tons of information. Wait for the scrolling to stop and then continue. 5. Now, on your phone, enter the dialer and type *#*#3282#*#*. 6. Select "LTE/Edit" again. 7. At this point the terminal on your PC should spit out a few more lines. A few of them will look like this: D/QC_RIL_OEM_HOOK(18638): sendOemRilRequestRaw returns value = 10 V/LG_SVC_ITEMS(18638): length =6 responseBytes=REMOVED itemValue=****** D/LG_SVC_ITEMS(18638): getCommands commandId 200 = ******-END D/LG_SVC_CMD(18638): itemID = 200, Value = ****** Where the "*" values are the digits to your MSL. You can ALSO install CATLOG from playstore and it will show up the SPC/MSL code using the above steps. 3. In the download link below after unrar you will get a folder Nexus 5 Reliance, it contails all the files needed. Install Lg United Mobile Driver file provided. 4. Put your device into FASTBOOT mode (Volume down key + Power) and use the following command : fastboot boot boot.img. The device will reboot itself and you will see homescreen. 5. To open DIAG MODE : adb devices (you should see it shows device as connected and serial #) adb shell su setprop sys.usb.config diag,adb Nothing will happen on device but you would see the pc is busy installing various drivers and in Device Manager-àPorts (there will LGE AndroidNet USB Serial Port (ComXX)) 6. Connect DFS to the device (You have SPC code and port setup already with you) 7. Change the parameters for Reliance (assuming all knows what needs to be done) 8. To make sure EVDO settings gets written AND they don’t revert back to stock, use the LG.txt file and write it with Free NV reader/writer progam provided. Credit to this goes to rimweb user KanishkGandharv (link : http://www.rimweb.in/forums/topic/36320-sprint-lg-optimus-g-evdo-solution/ ) 9. You would be able to dial *228 and hear Reliance IVR welcoming you on the network 10. Get the MEID registered and you are good to go!!! Download link : http://www.mediafire.com/download/3wf9ilhsq9t1mux/Nexus%205%20Reliance.rar
  2. I have Boost mobile MOTO E LTE XT1526. Everything works on 5.0.2, voice, data, messaging, hotspot, both for CDMA (Tata, MTS, Reliance) and GSM. 5.1 update is downloaded and sitting. Not updated yet. Want to know IF I should go ahead and do it or not. Will it hamper CDMA services in anyway, DATA especially. Thanks
  3. Yup...this WORKS. I followed the steps on my G Flex. Working like a charm. I see no reason, why won't work on G2. PS: I've set it to 5. OP has a fair idea why I can fire all cylinders...lol. Sent from my Flexy-$exy
  4. Hmm...any Crashes and loop after edit of Build.prop? As I can see in your screenshot that the signal strength is quite low and at XDA many have reported that device goes into crash and loop at full/high signals after editing of Build.prop. Have you experienced any of that or none coz maybe the signals are always low in your area for the GSM carrier you are using.
  5. I did this on my D820 which is US version. I don't think its gonna work on International version D821. An observation : If you change 'Network Mode' to Global/Insert GSM Sim card....Device picks up GSM PRL. In that case, need to connect with DFS and select CDMA_HDR again. Sent from my iPhone using Tapatalk
  6. US Cellular Samsung Galaxy Note II SCH-R950

    does this trick works with Sprint HTC One, if not pl help how do i use Sprint HTC one for conference call? I do understand this is not the section for Sprint HTC One but I really want to know if this or some other method may work for 3 way con call for Sprint HTC One. Thanks
×