Jump to content
Reliance Jio & Reliance Mobile Discussion Forums

blazing_bruce

Members
  • Content count

    9
  • Joined

  • Last visited

Everything posted by blazing_bruce

  1. Huawei Ec325 Reliance Netconnect Card

    I bought HUAWEI EC325 mobile usb modem for 4500Rs. I am already using Nokia 2112 with Freedom @ night plan. Installation of Huawei card,driver & modem was really easy. But i feel this connection is slower than Nokia 2112. Download rate is 3KB/Sec average. It never increases more than 4.0KB/Sec .. It means my net speed is 35Kbps max. But Reliance guys and Huwaei card pack says it will be 156.6kbps ... i need atleast my nokia's speed. Nokia's download rate was 15KB/Sec .. Why usb datacard seems slower? Is there any way to get a honest speed? Notes: I have full signal strength always. I am connecting net at nights mostly. My current(now(); ) plan is SWIFT100. I asked *333 migrate to Freedom plus (1.5 GB/Month - 900Rs plan) .. i will get it within 24 hours. Intel P4 - 512MB - 80Gig System I hope i will get some help from you friends
  2. Netbooster For Increasing Bandwidth Speed

    Hello, Today i got an SMS about NetBooster software from Reliance. Tested my bandwidth speed in www.speakeasy.net/speedtest after/before using netbooster. Before my speed was., 128 DL kbps 128 UL kbps Now 135 DL kbps 458 UL kbps It changes like.. 145 DL kbps 506 UL kbps DL - Download UL - Upload You can set bandwidth boosting level too. worth to try. Sofware download link: http://www.reliancecommunications.co.in/Co...netbooster.html Reply with your experience guys.
  3. Huawei Ec325 Reliance Netconnect Card

    control panel -> Network connections-{connection} -> right click-> properties->networking->select {TCP/IP}->click settings - >put tick in all of three->Reconnect.
  4. Slow Netconnect Speed On Rim

    I am also using HUAWEI EC325... Please dont use their Dialer... Just manually create a new connection Control panel->network connections -> new connection... and dial through that....
  5. Reliance Netconnect Usb Card On Linux - Howto

    It worked GREAT in Ubundu... I couldnt find Modem = /dev/ttyUSB0 ... Help in finding an exact modem in Centos(RedHat Distors)
  6. RConnect & Linux

    Hello, Man: Nokia Model: 2112 Cable : DKU5 OS: Ubuntu 6.06 (debian Kernal) Recognized modem : ttyUSB0 (defaultly it recognizes this..) checked by wvdialconf /etc/wvdial.conf [Modem0] Modem=/dev/ttyUSB0 Baud=115200 SetVolume=0 DialCommand= ATDT Init1=ATZ Init2=AT+CRM=1;+cso=33 FlowControl=Hardware(CRTSCTS) [Dialer reliance] Username=9345****** Password=9345****** Phone=#777 Stupid Mode=1 Inherits=Modem0 edited Resolv.conf as per advice from one post in this forum.. I dialed by wvdial reliance Result Could not modify /etc/ppp/pap-secrets: Permission denied --> --> PAP (Password Authentication Protocol) may be flaky. --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 5698 --> Using interface ppp0 --> Disconnecting at Sat Dec 2 05:33:33 2006 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 5 seconds --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ~[7f]}#@!}!}!} }<}!}$}%j}"}&} } } } }#}$@#}%}&}71S }'}"}(}"[14] ~~[7f]}#@!}&}#} }$HW~~[7f]}#@!}!}"} }<}!}$}%j}"}&} } } } }#}$@#}%}&}71S }'}"}(}"LV~~[7f]}#@!}!}#} }<}!}$}%j}"}&} } } } }#}$@#}%}&}71S }'}"} After this it continues showing garbage value.. i cannt use internet.. In that time it shows Dialing #777... and data transfer indication arrows in my mobile... But dont know what is the problem
  7. RConnect & Linux

    hello Mr.Paraj i have tried with your scripts. there is one error message that is... :Command not found :Command not found5753579 # this is a part of my mobile number :Command not found ':not a valid identifier PASSWORD /usr/sbin/pppd : unrecognized option '/dev/ttyUSB0' # actually there is no devices like ttyUSB0 or ttyACM0 in /dev/ Please help me. for every changes i must shutdown windows and then boot Linux. i have done all the changes as per your advice. Please help me. waiting for you Thank you, Karthi keyan.
  8. RConnect & Linux

    Hello all, I am using Nokia 2112 CDMA with DKU-5 cable. i want to establish a net connection under RHEL4 . i have tried lot of times. and all my doubts are in modem setup. in windows we are using Nokia CDMA 2x RTT modem. in linux how can i set up a modem? i am new in Linux. please help me. Thankyou, Karthi keyan EDIT: Ashokjp - I have deleted your other topic since it was a duplicate topic. Mutiple Posts/Topics will be considered spam. NO SPAMMING PLZ!! <TOPIC MERGED!>
  9. RConnect & Linux

    hello, I am using Centos 4(based on Redhat Enterprice Linux 3), May i connect my Nokia 2112 with CA-42 cable by your procedure ? Please help me. blazingbruce@gmail.com ----------------------------------
×