Search the Community
Showing results for tags 'palm'.
Found 2 results
Hello all this is a detail note about getting 1X on verizon palm pre plus 1. first turn off developer mode 2. after phone restart put phone on diag mode 3. connect phone to pc 4. install diag drivers 5. go to computer management and check the port number 6. then open qpst 2.7 build 7. in qpst configuration add the palm port 8. then open qpst service programing 9. you will see mobile esn and name if any. 10. select that phone and say read from phone 11. it will ask for SPC, SPC for all verizon phone are zero. 12. First important thing is to take backup for qpst configuration. 13. there is "save to File...." button , click on it and save the new file. 14. then go to profiles 15. put active profile=0 16. set ip = simple ip 17. then select profile 0 and then click on edit 18. then make all ip=0.0.0.0 19. in profile 0 keep user name password as it is. 20. then go to PPP tab. 21. in UM put user id and password as phone number. 22. do same in AN 23. then do write to phone, it will write all configuration to phone and phone will reboot automatically. 24. then in phone go to epst (##3836#) and put phone on 1x/rtt 25. make all IP zero in browser configuration in phone and reboot the phone So u can see 1X logo on screen and you can access to internet!!