Leaderboard

Don't mess with *#*#4636*#*# Coz it will trouble you for dual sim. I completely reset the phone and it's 12 hours using dual sim gsm Cdma. Working without fail. Sent from my Redmi Note 3 using Tapatalk

I do nothing just pop my Cdma and gsm sim after resetting the phone.But on first boot I tried to change the mode via *#*#4636*#*# but so much problems occur to use Cdma Gsm at a time. Sent from my Redmi Note 3 using Tapatalk

Sent from my Redmi Note 3 using Tapatalk

Requirements:- QXDM Not Required:- Root, Bootloader unlock Steps:- Part I:- GSM edge unlock 1. Select LTE from mobile networks settings. Remove SIM and switch off phone 2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging 3. Map the comports correctly to QXDM 4. Airplane mode 5. In QXDM, open command prompt, type spc=000000 6. Open NV browser, look for item 441 and make it 0x383 or 0xFFF in band line, click write 7. Look further for NV item 946, write 0x0028 in band pref 8. Lastly item no 1877 and write 2622339 to rf_bc_config line 9. Reboot 10. Phone now boots in global mode, insert GSM SIM and use with EDGE data. CDMA section remains untouched. Part II:- 3G HSPA+ UMTS 2100 mhz unlock (part II only after getting Edge signal) 1. Select LTE from mobile networks settings. Remove SIM and switch off phone 2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging 3. Map the comports correctly to QXDM 4. Airplane mode 5. In QXDM, open command prompt, type spc=000000 6. NV item 946, write 0x0EA8 in band pref 6. NV item 1877 and write 245891456 to rf_bc_config line 7. Full flash current firmware by fastboot with emphasis on fastboot erase modemst1, fastboot erase modemst2 8. Phone boots in global mode with HSPA+ Note:- Firmware flashing will remove unstable signal issue. All the changes will be permanent. CDMA/evdo remains as it was earlier.

So what is the need for others to see your Jio SIM's IMEI number??? Edit it asap..

XT1528 Switch off the phone. power it with vol down switch together use vol + or - to go to BPtools click power button. Phone powers, connect to pc. enable developer mode by clicking 10 times build number, you will get developer mode in settings. go inside and use usb debugging on phone ask to trust. tick and ok open device manager. install moto drivers (download it is available on online) google you will find 3 or 4 unknown devices. click last one, go properties, update drivers. click manually and select comport type, select moto and add moto diagnostic dirvers you will find comport in device manager. open DFS, give spc for this phone spc is 000000 unless changed in programming go to mobile tab and change simple ip to pref mobile ip change total profiles one from 6 and active profile one. reset the phone and restart the phone. entered apn manually and saved APN settings are name=any apn is net, user name is net, password is net mcc is 404 and mcc is 00 that's all, phone works with RGE sim or RECRUC068 Correct me if any steps worng.

SAME GOT CALL FOR MAHARASHTRA CIRCLE TOO. WITH RGSM POSTPAID MNP PLAN OFFER.

The new Nexus 6 is very easy to program. RGERUC and RECRUC068 work out of the box on this device. Data needs simple steps by DFS. Required:- Latest Motorola BP drivers, DFS Not required:- Root, bootloader unlock 1. Boot the phone into BP tools and select port "diag mdm" with no SIM inside and airplane mode turned on. 2. Make RTRE config to RUIM pref and reboot back to BP tools (can make it RUIM only after programming is complete) 3. Write omhxxx in ppp usr and S1912xxx in ppp password 4. Continue in data section in DFS, HDR SCP force AT config= RevA_MFPA HDR SCP force rel 0= Evdo_RevA Hybrid mode=enable Data MDR HSPD mode= MDR only 5. Insert RGERUC SIM and continue programming 5. Enable all six profiles in MIP section and write omhtestxx in all the six fields with MIP=Mobile IP 6. Reboot and enjoy.

Redmi Note 3 Review [Data Related] Evdo Works only once on RGE after reboot tried almost 20 times no luck. RN3 Having bad network issue while on GSM too. After Reboot or Aeroplane mode on off, mobile takes 2-5 minutes for network come. this problem comes after update to MiUI V7 1.8.0 CDMA WORKS ON BOTH SIM SLOT. CDMA+GSM OR GSM+CDMA i m getting network problem badly on dual sim mode. but less problem in single sim operation.

The good thing for us is all G4 variants USC, VZW and SPR are GSM CDMA. G4 SPR unlocking is easy and the other two are factory unlocked. Sent from my K016 using Tapatalk

I have uploaded newer versions of qpst and qxdm in software section. Both these tools give errors on Windows. @Ankit bhai, you have to use sika shortcut maker.apk or shortcutmaster_lite_modded_LS990.apk to pull up apns settings. Do not try to change GSM cellular bands from *#*#4636#*#* or will lose signal. I will put HSPA 3G UMTS band unlock tutorial for xt1055 and xt1093 shortly. Motorola has many diag mode ports like mot qc diag port, Motorola BP diagnostic port, Motorola usb diag port etc but phone's modem responds to only one diag port out of these. Also make sure adb is enabled with pc RSA key authentication. Auto APN for GSM UMTS on xt1093. Sent from my K016 using Tapatalk