[doublea]

I recently purchased a Reliance FWP phone in Bangalore. I got the LG LSI-110 CDMA phone with that. I purchased a data kit but unfortunately the CDROM only contains drivers for MS-Windows. I use a Mac PowerBook 17" and wanted to use this phone to connect to the Internet. After a little research, I have found a solution. The entire solution is described in a PDF document which I have attached to this post. Hope it is useful to someone.

Even if you have some other Reliance phone and want to use RConnect on the Mac, I suspect that the instructions provided here will work. I am sure the ModemScript Generator utility can create the proper script for you. Read on...

Attached File(s)

•  LG110.pdf (191.88K)
  Number of downloads: 1924

This post has been edited by doublea: 10 October 2005 - 12:06 PM

[Arun]

Thanks Anand, should help MAC users a lot... I'll pin this topic

[iMeMyself]

This is good. I would also like if u can help me find a driver or dialer for MotorolaV-730. I am using a iBookG4 and am fed up trying for a driver for it. I need to connect to the net badly else thr is no use having a RIM.

[vanikurup]

Hi everybody,

After reading many posts on this forum, I got myself a refurbished Samsung 191 (It was a big hunt) to connect to my Mac Powerbook running on OS X Tiger.
The phone is not being detected by my Mac. The AppleUSBCDCDriverPatch.pkg.tar I downloaded from the Reliance site is showing error on installation. Could someone tell me if they had a similar problem, or is it because I am running a higher version of OSX?

The phone is not being detected on my PC too, so perhaps it is the data cable. I have asked Reliance to replace it. Keeping my fingers crossed.

Any comments and suggestions are welcome.

Vani

<TOPIC MERGED!>

This post has been edited by Vishal Gupta: 20 February 2006 - 11:46 PM

[maheshsangle]

Guys, this looks as good start for me to connect my Powerbook with Nokia handset.

I hope with the basic script in place, I should be able to do that.

Keep your comments coming in.

Would be glad if anybody has generated this script for Nokia as well.

Thanks!

[peerbaba27]

Nokia phopnes are working. so are a whole host of others. keep posting your experiences, macusers!

Quote

LG 5340 CDMA on Reliance India
Bright 65000 CSTN Color display
Visually appealing and convenient slim form factor
Phone Book stores up to 600 x (4 entries+1 email +1 memo)
R World on BREW 2.1 platform
32 Poly ringtones
Rhythmic backlight for ring tones
High Speed Data Capabiltiy
LMS,SMS to Email,Airplane Mode


------------------------------------------------------------------------------------------------------------------------------------------------
Download Bandwidth Test Results
Download speed: 17 kilobits per second
Test details: 101 kilobytes downloaded in 47.515 seconds.
Receive buffer size: Not available

------------------------------------------------------------------------------------------------------------------------------------------------
LG CDMA Phone
Data Cable used : LG USB3000

Connect the phone to the Mac via the data cable. Go to System preferences -> Network and you will see the Mac has detected a new USB Modem (usbserial-1B1)

Configure:
Service Provider : Reliance
Account Name : Your Reliance India Mobile number (without any prefix)
Passsword : Same as above
Telephone Number : #777
Alternate Number : Leave Blank

Go to PPP Options:
Advanced Options : Unselect Everything
[i]I leave "Use Verbose Logging" ON, just to see in Connection Log how well the connection is happening.

Go to Modem Tab:
Modem : au cdmaOne C413S by Sony worked for me
Enable/Activate : Enable error Correction and compression in modem
Disable/Deactivate : Wait for dial tone before dialling
Dialing : Tone
Sound : On

Apply and Save. Open Internet Connect, select usbserial-1B1 and ht connect. There you go!

Note: The phone's design is so stupid, that the data cable and power chord cannot be connected at the same time. so you have to take breaks while the phone charges.

[squareone]

Hello Forum

I am using Powerbook G4 Note book from Apple. Does anyone has a modem script for Nokia 6265 CDMA on MAC. This will enable me to use the R Net Connect via Bluetooth. I have been using with Nokia 6255 but now i am buying the New 6265 CDMA. Plz let me know if anyone has the solution for the same.

Regards
Jigs

EDIT by Vishal Gupta < Topic Merged >

[chisurao]

I am using Powerbook G4 laptop , and I am unable to connect Reliance R-Conect to it. When I insert the InstalationCD of my Phone LG LSP350R, thelaptop doesnt accept it. I think the CD doesnt support MAC OS. How to install R-connect to my Powerbook G4? Can any one guide me in this reagrd?I have downloaded Modem Script Generator and put it in to the Library/Modem Script folder in MAC OS, but still it doesnt reconginse my LG LASP 350R nad hence I am unbale to use R-connect .
With Namaskaras
Dr Subramanya Rao,Mysore, Karnataka,India.
E-mail:- chisurao@sify.com
Phone-9448056406

[squareone]

Hello to all Mac Users

In any one wants to use Net connect via Mobile phone - Bluetooth on MAC, there is a modem script available for the same. All the models which supports Bluetooth will work on MAC without and hassle and within seconds you can setup your acct for surfing @144 kbps.

The script is available right in your MAC. Its preloaded with your mac book. Or else for download mail at rachayeta@yahoo.com


I also have a script for Huewaii Data card for Net connect. It's a 11 Mb file.

Regards

Jignesh

This post has been edited by squareone: 26 September 2006 - 01:03 PM

[prabu.venkat]

Hello Jignesh,

I have an iMac G5. I recently picked up the huawei usb modem (ec325) for the netconnect.
can you send me the steps/scripts for getting this combo going, please?

i have sent an email to your id, too.

thanx in advance,

;-p r a b u!

[anujit]

Yeah even I was recently having some trouble finding drivers for my Nokia 6255 for a Macbook. Thankfully googling helped and I was able to get some universal nokia 2g & 3g scripts. I'll try to share them in this forum sometime (if I remember). Otherwise people are free to ping me for it anyways.

[addiecool]

squareone, on Sep 26 2006, 01:01 PM, said:

Hello to all Mac Users

In any one wants to use Net connect via Mobile phone - Bluetooth on MAC, there is a modem script available for the same. All the models which supports Bluetooth will work on MAC without and hassle and within seconds you can setup your acct for surfing @144 kbps.

The script is available right in your MAC. Its preloaded with your mac book. Or else for download mail at rachayeta@yahoo.com


I also have a script for Huewaii Data card for Net connect. It's a 11 Mb file.

Regards

Jignesh

Please send me the file for Huewaii card at addiecool at gmail.com I have also sent an email to your address

[macindian]

prabu.venkat, on Jan 14 2007, 11:22 PM, said:

Hello Jignesh,

I have an iMac G5. I recently picked up the huawei usb modem (ec325) for the netconnect.
can you send me the steps/scripts for getting this combo going, please?

i have sent an email to your id, too.

thanx in advance,

;-p r a b u!

Hello Prabu,

Any luck in configuring the USD EC525 Modem to Mac OS. Please reply I need to buy a reliable wireless solution and this looks as the best option.

Thanks in advance,

Siva

squareone, on Sep 26 2006, 01:01 PM, said:

Hello to all Mac Users

In any one wants to use Net connect via Mobile phone - Bluetooth on MAC, there is a modem script available for the same. All the models which supports Bluetooth will work on MAC without and hassle and within seconds you can setup your acct for surfing @144 kbps.

The script is available right in your MAC. Its preloaded with your mac book. Or else for download mail at rachayeta@yahoo.com


I also have a script for Huewaii Data card for Net connect. It's a 11 Mb file.

Regards

Jignesh

Hi Jignesh,

If it works for EC325 USD Modem I would like to receive the script & procedure please.

Thanks buddy,

Siva

[squareone]

Dear Mac Users

Good news for all of you. The long awaited mac modem script for USB based modem is now available. For further assistance or help for using your USB based Modem with your mac machines, please mail or call me. There will be a small fee attached for the script as I have spent more money to procure the script from someone else.

Thank you.

Email: rachayeta [at] yahoo.com

[kashi]

squareone, on Mar 20 2007, 02:07 PM, said:

There will be a small fee attached for the script as I have spent more money to procure the script from someone else.

Thank you.

Email: rachayeta [at] yahoo.com

No need for the money folks. its available free on the net anyway....

Installed this modem on my macbook.

google search for launch2net on google or download it from here. download the software. its about 11 MB DMG file. Install on your mac. Its a demo package, but it installs the necessary drivers.

When you connect your modem, and go to network preferences, Network. It will say that it has detected a new huawei modem. Configure this modem. put in your service provider - reliance.

User name and password are your modem phone number.
The phone number to dial is as usual #777

In the modem tab, select the NM Universal Modem. I have disabled error checking etc. but you can play around with this and experiment. may have some effect on the speeds.

With this your modem should be installed. Click on Dial Now on the PPP tab and it should open internet connect and you should be able to connnect.

hope this helps.

jai guru dev
kashi

PS even though the DMG installer is a demo package, it installs the necessary scripts and hardware drivers to recognise the modem. thats the only reason we are installing it. It should also detect the modem automatically once you attach, but you can just force quit those applications.

This post has been edited by kashi: 25 March 2007 - 07:23 PM