abhishek_eleo 0 Report post Posted November 20, 2005 ==================================================================== Service Program Settings for LG CDMA RD5130 of Reliance RIM Prepaid ==================================================================== 1.Press #LGCDMA#*RD5130* 2.You'll reach the Service Menu 3.Enter Service Program ESN xxxxxxxxxx **some values are replaced by "x" to safeguard my own settings** NAM 1 MIN NUMBER 010846xxxxx NAM 1 HOME SID 146xx NAM 1 NAME Reliance Service Sec. Code xxxxxx NAM 1 MOBILE COUNTRY CODE 404 NAM 1 NMSID 0010846xxxxx NAM 1 True IMSI MCC 000 NAM 1 True IMSI NMSID 000000000000 NAM 1 PRL Enabled Yes NAM 1 CDMA Directory 0000000000 NAM 1 CDMA Home SID/NID 01=146xx/655xx NAM 1 CDMA Primary CH A 239 NAM 1 CDMA Secondary CH A 280 NAM 1 CDMA Primary CH B 553 NAM 1 CDMA Secondary CH B 594 NAM 1 Lockout SID/NID 01=0/0 NAM 1 CDMA Home Sys Req Yes NAM 1 CDMA Forn SID Req Yes NAM 1 CDMA Forn NID Req Yes NAM 1 Access Overload Class x Press Back NAM 1 AMPS Auto-Req Yes NAM 1 AMPS 1st PAGE CH 353 NAM 1 AMPS HOME SID 353 NAM 1 AMPS PhoneNumber 010846xxxxx NAM 2 Settings PHONE MODEL 74 SLOT CYCLE INDEX 2 NAM 2 MIN NUMBER 00000064xx NAM 2 HOME SID 146xx NAM 2 NAME Reliance NAM 2 MOBILE COUNTRY CODE 404 NAM 2 NMSID 0000000064xx NAM 2 True IMSI MCC 000 NAM 2 True IMSI NMSID 000000000000 NAM 2 PRL Enabled Yes NAM 2 CDMA Directory 0000000000 NAM 2 CDMA Home SID/NID 01=146xx/655xx NAM 2 CDMA Primary CH A 239 NAM 2 CDMA Secondary CH A 280 NAM 2 CDMA Primary CH B 553 NAM 2 CDMA Secondary CH B 594 NAM 2 Lockout SID/NID 01=0/0 NAM 2 CDMA Home Sys Req Yes NAM 2 CDMA Forn SID Req Yes NAM 2 CDMA Forn NID Req Yes NAM 2 Access Overload Class x Press Back NAM 2 AMPS Auto-Req Yes NAM 2 AMPS 1st PAGE CH 265 NAM 2 AMPS HOME SID 265 NAM 2 AMPS PhoneNumber 00000064xx PHONE MODEL 74 SLOT CYCLE INDEX 2 I tried to copy the NAM 1 Settings to NAM 2 Settings, So that I can Make and recive calls selecting NAM 2. All but except the LAst 4 Settings coudn't be changed: NAM 2 AMPS Auto-Req Yes NAM 2 AMPS 1st PAGE CH 265 NAM 2 AMPS HOME SID 265 NAM 2 AMPS PhoneNumber 00000064xx On restarting phone I could access the Service Area and Make Outgoing calls ring for 15 Secs max after which call disconnects, but if the reciever picks up the call then the call disconnects. After Several attempts finally I reached upto a setting which allowed me to Recieve SMS and make outgoing calls (only ring, the reciever won't pick up the call, otherwise it would disconnect!). I could not actually communicate on voice may be because these settings: NAM 2 AMPS Auto-Req Yes NAM 2 AMPS 1st PAGE CH 265 NAM 2 AMPS HOME SID 265 NAM 2 AMPS PhoneNumber 00000064xx couldn't be changed to NAM 1's settings, on selecting No* to 1st option, The effect was: NAM 2 AMPS Auto-Req No *Remember one you set this to "No" You can't set back original Values* NAM 2 AMPS 1st PAGE CH 0 NAM 2 AMPS HOME SID 0 NAM 2 AMPS PhoneNumber 00000064xx So, my final settings at NAM 2 were: NAM 2 MIN NUMBER 010846xxxxx NAM 2 HOME SID 146xx NAM 2 NAME Reliance NAM 2 MOBILE COUNTRY CODE 404 NAM 2 NMSID 0010846xxxxx NAM 2 True IMSI MCC 000 NAM 2 True IMSI NMSID 000000000000 NAM 2 PRL Enabled Yes NAM 2 CDMA Directory 0000000000 NAM 2 CDMA Home SID/NID 01=146xx/655xx NAM 2 CDMA Primary CH A 239 NAM 2 CDMA Secondary CH A 280 NAM 2 CDMA Primary CH B 553 NAM 2 CDMA Secondary CH B 594 NAM 2 Lockout SID/NID 01=0/0 NAM 2 CDMA Home Sys Req No NAM 2 CDMA Forn SID Req No NAM 2 CDMA Forn NID Req No NAM 2 Access Overload Class x Press Back NAM 2 AMPS Auto-Req No NAM 2 AMPS 1st PAGE CH 0 NAM 2 AMPS HOME SID 0 NAM 2 AMPS PhoneNumber 00000064xx That was all I could have done, Anyone with more knowledge and information, Please post and reply here. Share this post Link to post Share on other sites
ashoksoft 83 Report post Posted November 20, 2005 Good work mate .... but all this was covered in the QPST discussion sometime ago. I have "Red colored and "x" marked a few fields... " the reason I will PM you. The AOC can be misused, and is partially location (and handset manufacturer specific). If u really intend to see if u are able to use Line 1 and 2, try this... Take an LG RD2030 (old connection - Prepaid) Connect it to the comp using the serial port cable, and read the phone settings using QPST. Once done... do not disconnect the phone, but note the settings on CDMA Settings 1 and CDMA Settings 2 Now give a call from another phone (and Pick the call from the LG which is connected to the comp), while the call is in progress... take another mobile and once again call the LG handset (now u get call waiting)... read the settings on QPST's CDMA-1. RECEIVE THE SECOND CALL ... and see what changes happen in the CDMA-1 Settings ... u will see that NAM 2's settings - is the receiver of the second call... Or that reliance still supports two lines... except on new connections ... since RIM understood the loophole that existed in case the same was used for a conference call to an international / national number. -> this is PRESICELY why RIM has stopped call waiting in new connections. Cheers Ashok Share this post Link to post Share on other sites
amanker 0 Report post Posted November 21, 2005 Hi Abhishek, I have also tried this on my LG5130 phone and noted down the NAM settings. I want to change NAM2 to my BSNL settings so that i can use both the networks. when i changed the NAM2 settings on reliance phone then LG phone displays "please contact reliance customer care". If i change NAM2 settings on BSNL phone(HUNDAI) then it accepts NAM2 but roamings indicator flashes and cant make any call. thats coz my ESN no.(HYUNDAI) is not activated on reliance. but why cant i change my LG phone NAM2? Ican regiter my LG phone ESN no. on BSNL. So i want to change NAM2 of LG phone to BSNL so that i can use both network on one phone. hoping for reply. If anyone knows. IF reliance has somekind of protection in their handsets? Share this post Link to post Share on other sites
rohsum 0 Report post Posted November 22, 2005 Hi... Even I tried this on LG 6130. I tried putting in the settings of my old Tata Indicom phone(Kyocera) into NAM2. But strangely enough, the screen showed "Please contact Reliance Customer Care". I guess Reliance has built a safeguard against registering on other networks in the handset firmware. But I am sure there has to be a workaround, maybe someone can shed more light on this. Ashoksoft.. are u listening! Share this post Link to post Share on other sites
ashoksoft 83 Report post Posted November 22, 2005 But I am sure there has to be a workaround, maybe someone can shed more light on this. Ashoksoft.. are u listening! 47713[/snapback] No I was reading ... rather seeing ... could not have a text to speech engine reading out a web page at 2.30 AM! well I would love to comment further ... but for the moment I will just keep mum ! and give a surprise out very very soon! there is a lot of information being traded on IRC on mobiles! (hint hint) ohh bol hi deta hoon... What reliance has done is that it has hardcoded the values ... so even if u change the settings otherwise the Qualcomm chip still is programmed with default rim values as far as CDMA settings are concerned (PRL .. SID etc) The best way out ... Reflash the handset without the RIM settings ... or search if u can find anything like QPST which allows fiddling on 5130 ./ 6130 Cheers Ashok Share this post Link to post Share on other sites
Achilles 0 Report post Posted November 23, 2005 Hey Ashoksoft; U know any codes for the LG RD7230?!? #LGCDMA#*RD7230* Does not work!?! C'mon plz man...i'm kinda desperate. Chao. Share this post Link to post Share on other sites
ashoksoft 83 Report post Posted November 23, 2005 naa mate ... I own/ have owned a LGRD2030, a Nokia 2280 (if thats the correct number), a nokia 3585 (tata), a TCL Q550, a SE s700(i) - korean make, a RD5130, 6130, and recently took a Telson.... Never really played on any other handsets... would have loved to help ... but hey never really tried so no comments! Cheers Ashok Share this post Link to post Share on other sites
RajanPERT 0 Report post Posted November 23, 2005 CORRECTION:NOKIA 2880 menas NOKIA 2280 (Reliance first nokia handsets). I m right. Thanks and Take Care! Share this post Link to post Share on other sites
amanker 0 Report post Posted November 23, 2005 Hi AshokSoft, Thanks for taking intrest. I have changed the SID/NID/Channel/ etc. etc. that same was reflected in settings and that was confirmed when i run QPST. then i run ESN writer v1.01 that was a bad program (i know changing ESN no is illigal) thouht that i will change ESN to my bSNL mobile and after that using HCC i will transfer reliance settings. so that same ESN no will be registered with reliance. but the program was bad it erased at seetings to 0000.(this was also confirmed by LG service center software). then i again changed the NAM settings. idont know why reliance is checking NAM2 settings? Share this post Link to post Share on other sites
ashoksoft 83 Report post Posted November 23, 2005 hi Ashok Manker... I had my fair amount of experiences with ESN Writer... so not mentioning anything about it ! YES FIDDLING WITH THE ESN IS ILLEGAL. so no more descriptions about it. getting to the answerable question : NAM 2 : how many of you tried : http://www.rimweb.in/forums/index.php?act=...14&t=5171&st=0# ? I am sure hardly any ... coz if u had tried it out .. u would not have asked this question. NAM2 is the settings called for when u are on LINE-2 (or whe u receive a call waiting and pick up the second call) even when the mobile registers to the network, both NAM1 / 2 CDMA settings are updated. AOC is the first to be updated cheers Ashok Share this post Link to post Share on other sites
abhishek_eleo 0 Report post Posted November 24, 2005 u will see that NAM 2's settings - is the receiver of the second call... Or that reliance still supports two lines... except on new connections ... since RIM understood the loophole that existed in case the same was used for a conference call to an international / national number. -> this is PRESICELY why RIM has stopped call waiting in new connections. 47505[/snapback] Thanx for the update, I learned it... Share this post Link to post Share on other sites
madhumnair 0 Report post Posted December 30, 2005 Can u pls tell me whats the code for the same in New LG hand set--- RD6230 I have tried botth *rd6230* and *LGCDMA* at the end........ both dodnt work out Awaiting ur reply soon..... Share this post Link to post Share on other sites
kshah 452 Report post Posted December 31, 2005 there is nothing hard coded in any hndset You can chnge network on any handset any time. Just matter of right tools and techniques Share this post Link to post Share on other sites
heme_ndra 0 Report post Posted January 13, 2006 Hi! Can anybody pls tell me what is the the service preogram code (SPC) for Reliance rd6000 Thanks in Advance. Share this post Link to post Share on other sites
abhishek_eleo 0 Report post Posted January 23, 2006 Hi! Can anybody pls tell me what is the the service preogram code (SPC) for Reliance rd6000 Thanks in Advance. Use Bitpim, look under nav folder for ur SPC code! For further help refer to old posts in Technical sections. Share this post Link to post Share on other sites
Goelji 0 Report post Posted January 29, 2006 Hi All, I have three 'Reliance DAPO' numbers on 3 handsets.[free sms] 1. LG 5130, 2. Nokia 3125, 3. Nokia 2112. Its quiet difficult to handle 2 sets. As i use 1 for outgoing, 2 for Is it possible to use two numbers simultaneously? i.e. is it possible to set two numbers on NAM1 & 2 resp. one for outgoing & second for incoming? -Goelji 9312277913 Share this post Link to post Share on other sites
abhishek_eleo 0 Report post Posted February 9, 2006 Hi All, I have three 'Reliance DAPO' numbers on 3 handsets.[free sms] 1. LG 5130, 2. Nokia 3125, 3. Nokia 2112. Its quiet difficult to handle 2 sets. As i use 1 for outgoing, 2 for Is it possible to use two numbers simultaneously? i.e. is it possible to set two numbers on NAM1 & 2 resp. one for outgoing & second for incoming? -Goelji 9312277913 Dear Sir, according to our current technology and knowledge, it is not possible to use 2 numbers on 1 set. Since two numbers have different ESN numbers and their releated CDMA settings which u can't plant of same phone. Share this post Link to post Share on other sites
jdwayne 0 Report post Posted June 11, 2007 there is nothing hard coded in any hndset You can chnge network on any handset any time. Just matter of right tools and techniques can you tell me how to access nam settings to use my audiovox vx6600 on alltel network Share this post Link to post Share on other sites
HetalDP 947 Report post Posted June 11, 2007 nvm_0002 file contains SPC Share this post Link to post Share on other sites
PrateekDS 0 Report post Posted July 7, 2007 ====================================================================Service Program Settings for LG CDMA RD5130 of Reliance RIM Prepaid ==================================================================== 1.Press #LGCDMA#*RD5130* 2.You'll reach the Service Menu 3.Enter Service Program ESN xxxxxxxxxx **some values are replaced by "x" to safeguard my own settings** NAM 1 MIN NUMBER 010846xxxxx NAM 1 HOME SID 146xx NAM 1 NAME Reliance Service Sec. Code xxxxxx NAM 1 MOBILE COUNTRY CODE 404 NAM 1 NMSID 0010846xxxxx NAM 1 True IMSI MCC 000 NAM 1 True IMSI NMSID 000000000000 NAM 1 PRL Enabled Yes NAM 1 CDMA Directory 0000000000 NAM 1 CDMA Home SID/NID 01=146xx/655xx NAM 1 CDMA Primary CH A 239 NAM 1 CDMA Secondary CH A 280 NAM 1 CDMA Primary CH B 553 NAM 1 CDMA Secondary CH B 594 NAM 1 Lockout SID/NID 01=0/0 NAM 1 CDMA Home Sys Req Yes NAM 1 CDMA Forn SID Req Yes NAM 1 CDMA Forn NID Req Yes NAM 1 Access Overload Class x Press Back NAM 1 AMPS Auto-Req Yes NAM 1 AMPS 1st PAGE CH 353 NAM 1 AMPS HOME SID 353 NAM 1 AMPS PhoneNumber 010846xxxxx NAM 2 Settings PHONE MODEL 74 SLOT CYCLE INDEX 2 NAM 2 MIN NUMBER 00000064xx NAM 2 HOME SID 146xx NAM 2 NAME Reliance NAM 2 MOBILE COUNTRY CODE 404 NAM 2 NMSID 0000000064xx NAM 2 True IMSI MCC 000 NAM 2 True IMSI NMSID 000000000000 NAM 2 PRL Enabled Yes NAM 2 CDMA Directory 0000000000 NAM 2 CDMA Home SID/NID 01=146xx/655xx NAM 2 CDMA Primary CH A 239 NAM 2 CDMA Secondary CH A 280 NAM 2 CDMA Primary CH B 553 NAM 2 CDMA Secondary CH B 594 NAM 2 Lockout SID/NID 01=0/0 NAM 2 CDMA Home Sys Req Yes NAM 2 CDMA Forn SID Req Yes NAM 2 CDMA Forn NID Req Yes NAM 2 Access Overload Class x Press Back NAM 2 AMPS Auto-Req Yes NAM 2 AMPS 1st PAGE CH 265 NAM 2 AMPS HOME SID 265 NAM 2 AMPS PhoneNumber 00000064xx PHONE MODEL 74 SLOT CYCLE INDEX 2 I tried to copy the NAM 1 Settings to NAM 2 Settings, So that I can Make and recive calls selecting NAM 2. All but except the LAst 4 Settings coudn't be changed: NAM 2 AMPS Auto-Req Yes NAM 2 AMPS 1st PAGE CH 265 NAM 2 AMPS HOME SID 265 NAM 2 AMPS PhoneNumber 00000064xx On restarting phone I could access the Service Area and Make Outgoing calls ring for 15 Secs max after which call disconnects, but if the reciever picks up the call then the call disconnects. After Several attempts finally I reached upto a setting which allowed me to Recieve SMS and make outgoing calls (only ring, the reciever won't pick up the call, otherwise it would disconnect!). I could not actually communicate on voice may be because these settings: NAM 2 AMPS Auto-Req Yes NAM 2 AMPS 1st PAGE CH 265 NAM 2 AMPS HOME SID 265 NAM 2 AMPS PhoneNumber 00000064xx couldn't be changed to NAM 1's settings, on selecting No* to 1st option, The effect was: NAM 2 AMPS Auto-Req No *Remember one you set this to "No" You can't set back original Values* NAM 2 AMPS 1st PAGE CH 0 NAM 2 AMPS HOME SID 0 NAM 2 AMPS PhoneNumber 00000064xx So, my final settings at NAM 2 were: NAM 2 MIN NUMBER 010846xxxxx NAM 2 HOME SID 146xx NAM 2 NAME Reliance NAM 2 MOBILE COUNTRY CODE 404 NAM 2 NMSID 0010846xxxxx NAM 2 True IMSI MCC 000 NAM 2 True IMSI NMSID 000000000000 NAM 2 PRL Enabled Yes NAM 2 CDMA Directory 0000000000 NAM 2 CDMA Home SID/NID 01=146xx/655xx NAM 2 CDMA Primary CH A 239 NAM 2 CDMA Secondary CH A 280 NAM 2 CDMA Primary CH B 553 NAM 2 CDMA Secondary CH B 594 NAM 2 Lockout SID/NID 01=0/0 NAM 2 CDMA Home Sys Req No NAM 2 CDMA Forn SID Req No NAM 2 CDMA Forn NID Req No NAM 2 Access Overload Class x Press Back NAM 2 AMPS Auto-Req No NAM 2 AMPS 1st PAGE CH 0 NAM 2 AMPS HOME SID 0 NAM 2 AMPS PhoneNumber 00000064xx That was all I could have done, Anyone with more knowledge and information, Please post and reply here. Well i've been searching the NAM UNLOCK CODE FOR RD 2710................ can u help me with the code for this model.......... i hav tried all the codes........ Share this post Link to post Share on other sites
