Leaderboard

Reliance CDMA with data is working on Redmi note 3 16Gb which I just got from 23rd March sale. Sent from my Redmi Note 3 using Tapatalk

Well this news should sound a death knell to the imported phone market here on Rimweb. In some sms does'nt work, some don't update to latest software version, some require frequent re-programming etc. etc. When such a good phone is available for less than 10k for cdma, what is the use of the so many headaches involved with these imported handsets. The Rimweb sellers should wind up their shops. Cheers...

Requirements:- QXDM Not Required:- Root, Bootloader unlock Steps:- Part I:- GSM edge unlock 1. Select LTE from mobile networks settings. Remove SIM and switch off phone 2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging 3. Map the comports correctly to QXDM 4. Airplane mode 5. In QXDM, open command prompt, type spc=000000 6. Open NV browser, look for item 441 and make it 0x383 or 0xFFF in band line, click write 7. Look further for NV item 946, write 0x0028 in band pref 8. Lastly item no 1877 and write 2622339 to rf_bc_config line 9. Reboot 10. Phone now boots in global mode, insert GSM SIM and use with EDGE data. CDMA section remains untouched. Part II:- 3G HSPA+ UMTS 2100 mhz unlock (part II only after getting Edge signal) 1. Select LTE from mobile networks settings. Remove SIM and switch off phone 2. Boot into bootloader mode and select BPTools, after phone boots, enable debugging 3. Map the comports correctly to QXDM 4. Airplane mode 5. In QXDM, open command prompt, type spc=000000 6. NV item 946, write 0x0EA8 in band pref 6. NV item 1877 and write 245891456 to rf_bc_config line 7. Full flash current firmware by fastboot with emphasis on fastboot erase modemst1, fastboot erase modemst2 8. Phone boots in global mode with HSPA+ Note:- Firmware flashing will remove unstable signal issue. All the changes will be permanent. CDMA/evdo remains as it was earlier.

Due to a large section of buyers now opting to purchase GSM enabled CDMA device, I add another device for CDMA data provisioning. There are no special requirements to enable CDMA data on VZW G3. Root is not required. This is applicable to those users whose manual APN of #777 does not enable data. 1. From the dialpad, ##PROGRAM985, go to port test, switch it on. Diag mode will be ON. 2. With data enabled SIM inside, using DFS, go to data section and select, evdo_MFPA 3. Enable all the six profiles with omhtest@omh.relianceinfo.com in the MIP section fields and write. 4. May sometimes need to make APN as #777 if data does not start.

The good thing for us is all G4 variants USC, VZW and SPR are GSM CDMA. G4 SPR unlocking is easy and the other two are factory unlocked. Sent from my K016 using Tapatalk

I have uploaded newer versions of qpst and qxdm in software section. Both these tools give errors on Windows. @Ankit bhai, you have to use sika shortcut maker.apk or shortcutmaster_lite_modded_LS990.apk to pull up apns settings. Do not try to change GSM cellular bands from *#*#4636#*#* or will lose signal. I will put HSPA 3G UMTS band unlock tutorial for xt1055 and xt1093 shortly. Motorola has many diag mode ports like mot qc diag port, Motorola BP diagnostic port, Motorola usb diag port etc but phone's modem responds to only one diag port out of these. Also make sure adb is enabled with pc RSA key authentication. Auto APN for GSM UMTS on xt1093. Sent from my K016 using Tapatalk

thanks bro...

GSM with 3G HSPA+ unlocked on LG Tribute5 LS675 using SPR LS990 method after root with Kingroot 4.8.3.apk. After placing node.db file in carrier folder, look for the cust.prop and edit the lines ro.cdma.home.operator to Chameleon and ro.numeric to 000000. Save and exit. This will bring GSM/UMTS selection option in mobile networks settings. Do not rename or delete any system files in Tribute 5. Only freeze them by de-bloater pc app. Do not unroot after GSM unlock process. To be safe, take a qcn backup in qpst before beginning this process. Sent from my K016 using Tapatalk

Only remove/change Sprint or Verizon's network parameters in apns-conf.xml to Reliance. Make Reliance the default apn. Do not space or modify any other text or colon in this file.