Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
dkaile

Sprint Samsung Epic 4G - The Beast Is Here!

Recommended Posts

:previous: you must be missing something , or maybe your area is not having evdo yet.

Share this post


Link to post
Share on other sites

when using CDMA Workshop 2.7

when i send SPC to phone status bar says: Failed... Phone does not answer.

but when i write NV, using the TXT file. it says "You must send Current SPC to phone before write NV items.

But when i do it twice, it successfully writes the NV items.

Share this post


Link to post
Share on other sites

Dear abhi I think I know what u r missing now try doin it as I say

First put your phone in diag mode , than connect it to qpst and see which com port it is connecting to. Close qpst and start cdma workshop now first connect the phone to cdma and select the com port than by clicking the connect tab connect the phone than click on read tab you will see all your phone details appearing on the left which now proves that u r connected, go to security tab and put your spc and click on send , u wil get a message saying phone is unloced now do the nv write process, u will get the message to send spc but ignore it and click on ok. You will get a message in the bottom saying 36 items written successfully, now shut down cdma , it will ask to rest phone press ok and your phone will reboot. U r done. Same way u can write the prl.

  • Like 1

Share this post


Link to post
Share on other sites

go to security tab and put your spc and click on send

This is where I was wrong :D

i was trying sending SPC in wrong tab (main tab).

Thank you :) NV items written successfully.

+1 for you for your help

Same way u can write the prl.

Do i need any specific PRL for HSD/EVDO?

Coz I tested my speed after successfully writing NVitems, but its still 16Kbps (1X). :(

Share this post


Link to post
Share on other sites

@Rishisuri & others, pls provide info on enabling FM radio on epic... thanx in advance.

Share this post


Link to post
Share on other sites

Reliance-HSD-Local-10005.prl

Do i need any specific PRL for HSD/EVDO?

Coz I tested my speed after successfully writing NVitems, but its still 16Kbps (1X). :(

Share this post


Link to post
Share on other sites

link for a guide to update prl?

tried to search in google, but the procedure i used dosent seems to work for me.

Share this post


Link to post
Share on other sites

Abhishek,

Before changing PRL ensure that EVDO is provisioned from backend. Only configuring hsd username password through CW will not work.

Share this post


Link to post
Share on other sites

@rishisuri if there is no proper network or only 2 bars of network, then you will get 1x.

Share this post


Link to post
Share on other sites

Abhishek,

Before changing PRL ensure that EVDO is provisioned from backend. Only configuring hsd username password through CW will not work.

hmm,

then I have to ask Sadik bhai about it, whether EVDo services has been activated from backend or not for my number.

Share this post


Link to post
Share on other sites

ACS Syndicate Frozen Rom v1.2 is released yesterday

Whats new in v1.2

******************************************************************

Darkkys zipalighn method

Tweaked the file system for more speed and battery savings

Default scheduler to BFQ

Updated all apps

Added Galaxy Tuner, KiesAir, SamsungApps, Voltage Control

Baked in 6 lockscreen mod

Updated theme

******************************************************************

XDA Link, Download Standard

Share this post


Link to post
Share on other sites

anyone can please post the link to fully loaded SRF 1.2 w/ Touchwiz

Share this post


Link to post
Share on other sites

i think battery drain is more on SRF1.2 than on stock.

anyone else using SRF 1.2 like to share their battery info?

Share this post


Link to post
Share on other sites

^

Did you restore titanium backup apps + data? That is often the cause. Restore only apps not data.

Share this post


Link to post
Share on other sites

I installed all my apps all from the scratch. Was painful but thought it might help to make my phone quicker than before.

Sent from my SPH-D700 using Tapatalk

Share this post


Link to post
Share on other sites

i think i've bricked my epic :(

I was on SRF1.2 with purple CWM

first i had problem reading SD card on my laptop. formatted it using CWM. but no use.

Then I replaced my SD Card card to 1GD which i already had. it worked ok. but then I decided to go back to Stock Rom.

so I wiped all data, and went for stock using Odin.

but my Odin hanged at many stages..

some times hanged at .. Setup connection

some times it hanged at .. data.rsf

some times it hanged at .. factory.rsf

then i searched XDA fourm. and a thread said to check all 3 options in Odin: repartition, auto reboot, reset time

but odin hanged at set partition .. DO NOT TURN OFF TARGET!!

googled and tried all methods.. but odin cannot flash stock rom :(

Please help :(

Share this post


Link to post
Share on other sites

My phone is bricked.

USB device not recognized... (DOwnload Mode) :(

Unknown device.

I tried 2 different data cable. Win 7, Win XP, Different USB Ports

but no use. My phone is not recognised by Windows. is it problem of the phone?

Share this post


Link to post
Share on other sites

http://forum.xda-developers.com/showthread.php?t=1052813

Try a different USB port

Take out battery and plug phone into computer and put into download mode without the battery installed

Uninstall the drivers, reboot, and reinstall the drivers

http://forum.xda-developers.com/showthread.php?t=773032

http://forum.xda-developers.com/showpost.php?p=7988098&postcount=7

Edited by dipanlahiri

Share this post


Link to post
Share on other sites

yep tried all these. but my stubborn laptop does not recognize the device on any of the ports.

uninstalling / reinstalling drivers, restarting PC.. tried all that. but still having the same problem.

moreover I also tried on desktop using XP & Win 7.

my phone is recognized by only 1 out of 4 USB ports. That too with Stock USB cable. (Not with Chinese cable i purchased yesterday).

And when flash stock using Odin, it freezes at some point or the other and Screen of the phone goes off or sometimes green.

******

On pressing power on botton or Volume Down+Cam+ power button.. NOTHING HAPPENS.

However I can boot into Download Mode (on battery only).

1) Computer do not recognize USB Drive. (tried uninstalling drivers > rebooting > reinstalling > rebotting ) still USB device not recognized. Even tried with different USB cable. And different ports.

2) However I managed it on my other computer. Where only 1 out of 4 USB port recognize my device.

3) Tried Odin to flash EC05 Stock... It hangs at some place or the other, and screen goes off or some times green (very rare).

4) Phone do not restart in Download mode without battery.

I tried to boot download mode without battery (plugged into computer).. but it wont.

Battery+USB = phone wont boot in download mode.

Phone boots to download mode only on Battery.

After that If i plug in the phone and remove the battery.. screen still stays on.

******

Edited by abhi.r

Share this post


Link to post
Share on other sites

Okay, I unbricked Epic.

thanks to Blackberry. (Now I officially love in love with BlackBerry).

The data cable of Blackberry which i borrowed from my friend did the trick.

Flashed odin with Repartition/Auto Reboot/ F. Reset Time / Phone EFS clear all checked.

But now problem is when phone was on, i see a small triangle above the Signal Strength notifier.

When i try to make a call.. i cant.

When i try to call my number from another number, it says my phone is switched off.

I even tried *228.. and it says my number is already been activated.

I think i need to install something more.

Gurus, please help.

PS: I would like to repeat... Im in love with blackberry. it saved my phone. :D

Share this post


Link to post
Share on other sites

Congratulations

Good to know about cable, my comments were wrong

Flash prl. Your phone need to be programed for MIN, PRL and other provisioning data

Sent from my SPH-D700 using Tapatalk

Share this post


Link to post
Share on other sites

Thanks Kshah bro.

Okay, here is what i did...

Radio programmed with the help of thread by harismahesh http://www.rimweb.in/forums/topic/29968-guide-for-radio-reprogramming-eb13-radio-reset-solution/

thank you harishmahesh

Also updated the PRL to 10005.

The triangle is gone. but still i cant make/receive calls.

Signal strength is also very random.. mostly 0 or 2 bars... sometimes it bumps to 100%.

Edited by abhi.r

Share this post


Link to post
Share on other sites

Hmmm try checking the Akey! That might be the problem.

  • Like 1

Share this post


Link to post
Share on other sites

^

I think the MIN needs to be re-injected

Share this post


Link to post
Share on other sites

Okay, In CDMA WOrkshop in NAM when I clicked Read.. it shows as in the pic...

*PICS REMOVED*

whats wrong and how to correct it?

Edited by abhi.r

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×