STs 0 Report post Posted June 29, 2014 ZVC does not have that option to change the ppp settings and thus the option will not stick. You can make the NV item 39939 to 0 and then the NV dump will stick. So I was trying to write nvdump on stock 4.4.2. But it is not sticking even after selecting 0 to 39939. I tried using DFS as NV writer was giving "not a valid nv file" error. It resets automatically on system reboots. Only HDR AN Long seems to be resetting though. nv.JPG EDIT: It finally sticked. Used the same LG.txt method used for sticking NV dump on Optimus G. http://www.rimweb.in/forums/topic/36320-sprint-lg-optimus-g-evdo-solution/ So. Let me see if i get the data right You are flashing the LS980 to work on CDMA (But also in GSM), you were using ZVC update at stock, radio and system in ZVC. Then you wrote the LG backup that thread and the HDR sticks? In DFS i get the Profiles done with passwords, but PPP, HDR and other passwords are not sticking in nor by DFS or QPST and i don´t have CDMA WS 3.X wich i've been told that works like a charm with no drama. I am facing a lot of frustration on ZV7 ( I usually use the most outdated software since tipically it is easier to flash phones) I've changed some NVs and stuff to work around the problem but no luck Help me not get insane.. Share this post Link to post Share on other sites
Vinod Nayak 443 Report post Posted June 29, 2014 One of our fellow member has managed to get data to work on 4.4Kit Kat on RUIM mode. Keep an eye on the forum for a upcoming tutorial. 6 Share this post Link to post Share on other sites
ankurcshah 112 Report post Posted June 29, 2014 To enable 2g only in gsm Install g2 exposed and apply updates Then install inteli3g and enable gsm only mode Vinodji pls put this in op Sent from my LG-LS980 using Tapatalk 2 2 Share this post Link to post Share on other sites
kuduku 24 Report post Posted June 29, 2014 (edited) To enable 2g only in gsm Install g2 exposed and apply updates Then install inteli3g and enable gsm only mode Vinodji pls put this in op Sent from my LG-LS980 using Tapatalk 2 Worked fine but whats the use of G2 xposed ? It didnt ask me to apply any updates . It was xposed module so restarted and I didnt change any settings . Opened intelli3G which was again xposed module and required restart and setup 2G as per my requirement . But is G2 xposed required ? Will intelli3G alone will not work ? EDIT Uninstalled G2 xposed and intelli3G still works fine . Rebooted to confirm . I am on stock rooted ZVC . I am on 2G only . Finally an app which works to keep it on 2G . Thanks Edited June 29, 2014 by kuduku 2 Share this post Link to post Share on other sites
ankurcshah 112 Report post Posted June 29, 2014 To enable 2g only in gsm Install g2 exposed and apply updates Then install inteli3g and enable gsm only mode Vinodji pls put this in op Sent from my LG-LS980 using Tapatalk 2 Worked fine but whats the use of G2 xposed ? It didnt ask me to apply any updates . It was xposed module so restarted and I didnt change any settings . Opened intelli3G which was again xposed module and required restart and setup 2G as per my requirement . But is G2 xposed required ? Will intelli3G alone will not work ? EDIT Uninstalled G2 xposed and intelli3G still works fine . Rebooted to confirm . I am on stock rooted ZVC . I am on 2G only . Finally an app which works to keep it on 2G . Thanks A customer of mine told me regarding this, I actually have no idea about it. Well I am glad i could be of some help. Just forward this trick to the people who are in need of using 2G. Thanks for confirming. Share this post Link to post Share on other sites
ev1lb0ygen1us 27 Report post Posted June 29, 2014 To enable 2g only in gsm Install g2 exposed and apply updates Then install inteli3g and enable gsm only mode Vinodji pls put this in op Sent from my LG-LS980 using Tapatalk 2 Hats off bro. Been looking for a solution like this one. BTW any way to switch control between RUIM and NV without connecting to PC? Any apps for it? Share this post Link to post Share on other sites
ankurcshah 112 Report post Posted June 29, 2014 No there is no such solution possible. Share this post Link to post Share on other sites
bigbyte 24 Report post Posted July 1, 2014 Hats off bro. Been looking for a solution like this one. BTW any way to switch control between RUIM and NV without connecting to PC? Any apps for it? Some CM ROM's provide this functionality. Don't know whether it is available for G2 or not. Share this post Link to post Share on other sites
ev1lb0ygen1us 27 Report post Posted July 1, 2014 Hats off bro. Been looking for a solution like this one. BTW any way to switch control between RUIM and NV without connecting to PC? Any apps for it? Some CM ROM's provide this functionality. Don't know whether it is available for G2 or not. Yeah, I read about it as well. Any G2 CM users can pitch in? Sent from my LG-LS980 using Tapatalk Share this post Link to post Share on other sites
yanky1586 17 Report post Posted July 1, 2014 Yeah its becoming a big issue but once ur getting in touch with LG they are replacing it! So be polite to them and u cn get It done Sent from my SPH-L900 using Tapatalk 2 My G2 also went kaput...can you please assist me in getting this replaced ??? Sent from my Galaxy Nexus using Tapatalk Share this post Link to post Share on other sites
ev1lb0ygen1us 27 Report post Posted July 1, 2014 Yeah its becoming a big issue but once ur getting in touch with LG they are replacing it! So be polite to them and u cn get It done Sent from my SPH-L900 using Tapatalk 2 My G2 also went kaput...can you please assist me in getting this replaced ??? Sent from my Galaxy Nexus using Tapatalk Oh sorry to hear that. What happened? Digitizer went bad? Share this post Link to post Share on other sites
ankurcshah 112 Report post Posted July 1, 2014 Its the same touch screen issue which few people faced @ev1lb0ygen1us Share this post Link to post Share on other sites
ev1lb0ygen1us 27 Report post Posted July 1, 2014 Its the same touch screen issue which few people faced @ev1lb0ygen1us Oh damn. So this issue is bound to happen at some point? Share this post Link to post Share on other sites
ankurcshah 112 Report post Posted July 1, 2014 Not really, it happens to some phones and not to some. You can never tell. @ev1lb0ygen1us Share this post Link to post Share on other sites
hiteshkkk1 327 Report post Posted July 1, 2014 I've sold more than 10 to 15 phones... 3 of them have faced this issue till date Sent from my LG-LS980 using Tapatalk Share this post Link to post Share on other sites
ev1lb0ygen1us 27 Report post Posted July 1, 2014 I see. This is the digitizer for the phone right? http://www.ebay.com/itm/Replacement-Touch-Screen-Digitizer-Glass-For-LG-Optimus-G2-LS980-VS980-Black-/380873163016?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item58adcf4108 Not a bad idea to have one in spare, right? Share this post Link to post Share on other sites
kuduku 24 Report post Posted July 1, 2014 Hats off bro. Been looking for a solution like this one. BTW any way to switch control between RUIM and NV without connecting to PC? Any apps for it? Some CM ROM's provide this functionality. Don't know whether it is available for G2 or not. Yeah, I read about it as well. Any G2 CM users can pitch in? Sent from my LG-LS980 using Tapatalk http://forum.xda-developers.com/showpost.php?p=52894855&postcount=2283 I have not tried it out . There are two RayGlobe G2 ROMs http://forum.xda-developers.com/showthread.php?t=2644753 and http://forum.xda-developers.com/showthread.php?t=2590613 I have not tried any of above . Share this post Link to post Share on other sites
Manoj Patel 18 Report post Posted July 1, 2014 It's certainly impossible to remove Lcd part from assembly to change only digitizer.. Need whole assembly digitizer plus Lcd combo to change it easily.. I have change Lcd for two phone and it's pretty easy.. Sent from my XT907 using Tapatalk Share this post Link to post Share on other sites
hiteshkkk1 327 Report post Posted July 1, 2014 It's certainly impossible to remove Lcd part from assembly to change only digitizer.. Need whole assembly digitizer plus Lcd combo to change it easily.. I have change Lcd for two phone and it's pretty easy.. Sent from my XT907 using Tapatalk Touch can be changed... I had done for g pro.. If anyone is willing to import touch, i can buy 3 to 4 pieces.. There are many available in 25$ range.. Sent from my LG-LS980 using Tapatalk Share this post Link to post Share on other sites
Vinod Nayak 443 Report post Posted July 2, 2014 Its very hard to separate the digitizer from the lcd 1 Share this post Link to post Share on other sites
phonegeek 588 Report post Posted July 2, 2014 It was possible in old phones to change only digitizer, now in newer models its not possible. Even if its done, it may damage the display. Sent from my SM-N900P using Tapatalk Share this post Link to post Share on other sites
Manoj Patel 18 Report post Posted July 2, 2014 It's certainly impossible to remove Lcd part from assembly to change only digitizer.. Need whole assembly digitizer plus Lcd combo to change it easily.. I have change Lcd for two phone and it's pretty easy.. Sent from my XT907 using Tapatalk Touch can be changed... I had done for g pro.. If anyone is willing to import touch, i can buy 3 to 4 pieces.. There are many available in 25$ range.. Sent from my LG-LS980 using Tapatalk I have tried separating LCD from digitizer but it's glued and you can easily damage LCD .. Sent from my XT907 using Tapatalk Share this post Link to post Share on other sites
ssr 10 Report post Posted July 3, 2014 (edited) My phone gets heated up quickly, 55-60 c when I push apps from play store. currently I have used no frill cpu control and set the min freq to 300, max to 1.2G and Governor to Conservative Installed Greenify to hibernate some app Any one having the same issue? Also battery starts draining very fast when I use, what apps I have to block to stop it? currently in ruim mode, ZVA + d3rpg2 custom rom, rooted, data + GPS always on, nfc off, sync on, auto-brightness 40%, watzapp + email on. Update: no frill cpu was not setting upper cap, so used trickster mode and was able control the max speed. But this was not setting the cap for other cores, any better tool to set the cap? Edited July 3, 2014 by ssr Share this post Link to post Share on other sites
ssr 10 Report post Posted July 3, 2014 Got into another trouble, not getting calls from others, I can hear that the person is not ready to receive the call after 1-2 rings. I did a factory reset and now it is always in a busy tone when i call from other line. Share this post Link to post Share on other sites
ankurcshah 112 Report post Posted July 3, 2014 Got into another trouble, not getting calls from others, I can hear that the person is not ready to receive the call after 1-2 rings. I did a factory reset and now it is always in a busy tone when i call from other line. I faced the same issue. The call gets registered as a missed call. Factory resets do not solve It. Use lg flash tool and flash with tot a couple of times it Will go away. Sent from my LG-LS980 using Tapatalk 2 Share this post Link to post Share on other sites
