Leaderboard

Dear All, Presenting here the Money Saving way of getting SPC of Sprint Blackberry Phones (Only for 8530 / 9330 / 9670). Before taking any of these steps please note a few things:- 1. All this exercise will only save you Rs. 200-300 as you can get SPC solution from eBay or other sources by spending money. But for people like me and other sellers here, it is good to use this, I have already spent more than 2000/- on getting SPCs for 9330 / 9670 on various occasions. 2. This guide is required only for SPRINT Blackberry Phones. Please note that Verizon / Alltel / US Cellular has SPC as "000000", For Metro PCS netowrk Blackberry you can use this website to get SPC free of cost. 3.Though these are no chance of doing any harm to your Blackberry Device by using this Guide, STILL BE AWARE that you are using this guide at your own risk. Its more like a Statutory Warning so I have to warn you. Don't bother we are here to save you out of any trouble. Here you go. Steps are all common for all the three models once you download the required files. BB8530 (Courtsey Parin Bhai) (Tested and Found working) BB9330 (Don't have any Sprint BB 9330 fpr Testing, but should work) BB9670 (Tested and Found working) You can download the file required from above links based on your Blackberry Model. Steps to be taken:- 1. Install Blackberry Desktop Manager on your PC. 2. Connect your BB phone with PC and let the Drivers Installation take place completely. 3. UnZip/UnRar the file downloaded from above link. 4. Open the unzipped / un-rar file you got in step 3 above while your device is connected with PC. 5. A commnad prompt type application will open and connect to the bootrom of your BB device. 6. This application will start loading the rom/os on your device, showing progress in %. 7. Once it is done completely your device will reboot. 8. NOW PLEASE DON'T PANIC, After booting your device will show ---- No Application Linked ------ 9. Now with your device connected with PC, open CDMA Workshop or QXDM Professional. (Google and u will find a lots of link to these applications, even in Rimweb). I have done this with help of Official CDMa WS 3.7.5, the older cracked v2.7 may also work. For using QXDM command go here and say thanks. 10. Select the Com Port of your device and connect the Com port. 11. Go to Security Tab and in the SPC section, click Read. Thats all.................. for the SPC, you will find it there in CDMA WS / QXDM. Now that was the half work done and you have to get your device back to working condition. Use the following steps:- 1. You will need the Device OS for your Blackberry, get it from HERE 2. Install the file so downloaded on your PC. 3. Go to the folder "C:\Program Files\Common Files\Research In Motion\AppLoader" and delete Vendor.xml file. 4. Run Apploader.exe file and it will show the PIN of your device connected with PC. 5. Just follow the on screen steps to load the device OS and bring back life in your Blackberry. Enjoy and spend these 200-300 bucks for some good cause.

Flash & Recovery Solutions for HTC Incredible 2 Common Downloads (Working Tested 21/12/2011) :- Verizon Stock 2.3.3 ---- http://www.megaupload.com/?d=FBLX0135 (PG32IMG_RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.4.zip) Chinese 2.3.4 ---- http://www.megaupload.com/?d=AOQ42MYO (PG32IMG_CN_3.06.1401.0_Radio_1_01_50_0817_NV_MFG_CT_2.71.zip ) HTC Drivers :- Download adb & fastboot :- Download CWM Recovery Image :- Download Remember to do following for most Flash, S-OFF, Recovery to work --- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) Tool for S-OFF (Will work on Verizon Stock 2.3.3 / hboot 0.97 Only) --- revolutionary.io Note --- You need to S-OFF only once in Handset lifetime unless ........ Hence most of you will need it once only. Files required to get Superuser working on Phone --- Download, Copy to SD card & Flash thru recovery (Install Zip from SD card) in following order --- 1. http://downloads.and...fghi-signed.zip 2. http://downloads.and...fghi-signed.zip Make sure of the Order. Else it might not work. Note : Phone Should be S-OFF Already & CWM Recovery should be installed on Phone. Flash ROM from SD Card 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. Copy ROM to SD Card & Rename to PG32IMG.zip 4. Place it into SDCards root (SDCard must be format by FAT32) 5. Switch off Phone. Press Volume Low & Power Button together & Hold to Put Phone into Bootloader mode and Flash this ROM. 6. Follow steps shown on screen. If everything is OK, Bootloader will automatically take PG32IMG.zip & show option. Volume UP to Flash the Phone & Volume Down to Reboot. After you have flashed your Phone. I suggest to Rename or Remove RG32IMG.ZIP (Rom File) from SD Card so that if you ever go to bootloader again, it does not show Flash alert again. Flash ROM from PC (Using Fastboot --- Personally I like this) 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. You need android-win-tools (adb.exe & fastboot.exe). Extract zip to folder & copy the ROM to same folder. Example (D:\adb) 4. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. Open Command Prompt (Windows 7 / Vista --- Run as Administrator) 6. Follow Commands --- d: cd adb adb reboot bootloader fastboot oem rebootRUU fastboot erase cache fastboot flash zip <<ROM File Name>> fastboot reboot <<ROM File Name>> --- file name for the ROM. Example :- fastboot flash zip PG32IMG_CN_3.06.1401.0_Radio_1_01_50_0817_NV_MFG_CT_2.71.zip fastboot flash zip PG32IMG_RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.4.zip Flash CWM Recovery from PC (Using Fastboot) 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. You need android-win-tools (adb.exe & fastboot.exe). Extract zip to folder & copy the recovery Image to same folder. Example (D:\adb) 4. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. Open Command Prompt (Windows 7 / Vista --- Run as Administrator) 6. Follow Commands --- d: cd adb adb reboot bootloader fastboot erase cache fastboot flash recovery cwm-4.0.1.4-vivow.img fastboot reboot Flash CWM Recovery from PC (Using revolutionary --- Easy Way --- Internet Must) 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. go to revolutionary.io 4. Download tool for Windows or Linux. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. If Phone is already S-OFF, It will ask you to Flash CWM Recovery. 6. Press Y & Enter to flash recovery. Wait for Few minutes, Since revolutionary will download this from Internet directly. 7. Phone will end in Fastboot Menu. Select "Reboot" to restart the phone. How to go to Recovery ---- Using PC --- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. You need android-win-tools (adb.exe & fastboot.exe). Extract zip to folder Example (D:\adb) 4. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. Open Command Prompt (Windows 7 / Vista --- Run as Administrator) 6. Follow Commands --- d: cd adb adb reboot recovery Using Phone ---- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. Switch Off Phone. 4. Hold Volume Low & Power Button together & you will see the Bootloader Menu (hboot menu) 5. Select "Recovery" 6. Phone will Reboot & you will be in Recovery menu. How to go to Bootloader Menu (hboot Menu) ---- Using PC --- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. You need android-win-tools (adb.exe & fastboot.exe). Extract zip to folder Example (D:\adb) 4. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. Open Command Prompt (Windows 7 / Vista --- Run as Administrator) 6. Follow Commands --- d: cd adb adb reboot bootloader Using Phone ---- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. Switch Off Phone. 4. Hold Volume Low & Power Button together & you will see the Bootloader Menu (hboot menu) ------------------------------------------------------------------------------------------------------------------------------------------------------------------- Please post here for all issues relating to HTC Incredible 2. Please Note --- I shall reply to Post made within this Topic. No PM's shall be replied unless I ask for.