Jump to content
Reliance Jio & Reliance Mobile Discussion Forums

Leaderboard


Popular Content

Showing most liked content on 09/06/2012 in all areas

  1. 4 points
    Hello Friends, I'm willing to help all local residents for apple programing for internet & sms issues on ios 5.1.1. Pls note phone should be jailbroken as I'll not indulge in all that stuff... Charges would be Rs. 2800/- per device. If interested can contact me on gauravjc@gmail.com...
  2. 3 points
    JellyBean Update for Samsung fascinate i500 Ok friends here are the details about how you guyz can update your fascinates to the latest JELLYBEAN OS. There are plenty of JB roms out there , from amoung them i have chosen the JELLYBRO CM10 KANG , later on i will explain about the other options too. everything works great ( but then ocassional bugs here and there can be seen as these all are unofficial builds ) one imp thing is for JB to work great on fascinate the internal storage partition has been decreased to 500MB , this could be some sort of nuisance to guyz who use 100s of apps DOWNLOADS and INSTALLATION PART 1 - If you are already on any ICS or other MTD ROM that is THS builds, aokp or cm9 Here are the files needed [ STORE THEM ALL ON YOUR SD CARD ] 1.. ROM : use the latest one at the top http://fitsnugly.eur...ce=fascinatemtd 2.. Latest GAPPS - http://fitsnugly.eur...10&device=gapps 3.. ICS DATA Fix ( required to get the 3G data running , which gets disabled while flashing any ICS ROM on imported I500 mobiles ) http://www.mediafire...srqv32venglftmq 4.. Exclusive Devil Kernel - will update about the compatible kernel later INSTALLATION : 1.. backup data , backup apps with whatever method you like 2.. Hit power button > select Reboot > Select Recovery > Make a nandroid 3.. Once your nandroid is completed > wipe DATA/factory reset > wipe cache partition > go to advanced > wipe dalvik cache FOR JELLY BRO 4.. Once done > Flash the JELLYBRO ROM 5.. Once Rom flash completes > flash the gapps > once them are done> flash the data fix PROFIT PART 2 - If you are still with Gingerbread, Froyo , Eclair , or - then follow this procedure Files needed 1...ODIN http://www.mediafire...6ipsaf418ah8gr5 2..Atlas pit http://www.mediafire...19fo7ftwgz8tgr8 3..EH03 Stock Gingerbread ROM for Fascinate http://www.imnuts.or...3_GB_CM.tar.md5 OR http://www.mediafire...g4afpb8u522oj2y http://www.mediafire...r4fi9gl59j832yl 4..Clockwork Mod recovery fixed for CM9 http://www.mediafire...fl733m5cys3f6ea 5.. Teamhacksungs build 1 http://www.mediafire...67782p054lp6o22 INSTALLATION - 1 .. Make a nandroid backup of your current ROM ( better safe then sorry - just in case you messup anything ) If you dont know how to make a nandroid backup then ask around the option is there in all custom cwm recoveries 2 .. download all the files on your SD card mentioned in PART 1 of the totorial above 3.. turn off your phone > remove battery > attach the usb cable and put it in download mode ( press vol down and insert the usb cable which is already connected to your PC ) 4.. Double click and Open ODIN ( your phone should show on a com port inside odin > click PDA > select the EH03 stock GB file that i have mentioed above 5.. Click Pit and select the atlas pit file mentioned above 6.. Hit start , the stock GB will be flashed > it will take ten minutes for the flash to finish, once completes , put the battery in 7.. Reboot phone > it will take another 10 or so minutes , once it boots shut it down 8.. remove battery > put phone in download mode again ( by holding vol down and inserting the data cable ) > and in PDA section flash the clockworkmod fixed for Cm9 file 9.. Once it completes > put the battery in > DONT restart phone > instaed push and hold volume UP and Volume Down and power button together and you will boot into a all new BLUE cwm recovery 11.. wipe DATA/factory reset > wipe cache partition > go to advanced > wipe dalvik cacahe 12.. Once done > Flash the Team hacksung ics build 15 mentioned above , ( which you have stored on ur SD card ) > if upon completion of ROM flash, your phone itself restarts and goes back to recovery again > dont panic > again wipe all three and flash the Rom again. wait for the rom flash to complete 13.. once Rom flash completes > reboot the phone > [ NOW YOU ARE ON ICS THS 1 ] shutdown > wipe cache > wipe dalvik > wipe data > and flash the JELLYBRO ROM mentioned at the top > flash the gapps file mentioned at the top > flash the ICS data fix PROFIT again btw : You cant hold me or RIMWEB responsible, If upon following any of the above steps YOUR PHONE bricks and becomes an expensive paperweight, or ghosts start to haunt you or anything bad happening to you.
  3. 1 point
    now that cheap android phones have flooded the market, there are many users who does not even know how to turn off the GPS.
  4. 1 point
    Check this for People in mumbai http://www.rimweb.in...ocal-mumbaites/ Wow, Gaurav's above offer for Internet/SMS on iOS 5 for INR 2800/- seems really great. Specially since there won't be any hassle of fiddling around wasting time or risk of getting some thing wrong. Only for Mumbai people though.
  5. 1 point
  6. 1 point
    I'm glad I could help. The same problem I faced when I unknowingly flashed GALAXY SIII nam on my epic. Did exactly what you mentioned. Sent from my SPH-L710 using Tapatalk 2
  7. 1 point
    Thanks Josh again. It indeed takes lot of time in updating step by step guide. Hats off to your prompt response as well. Keep up the good work.
  8. 1 point
  9. 1 point
    mubarak ho ayaz bhai... lagta hai P&G wale ye thread follow kar rahe hain or woh aapke sabr ka imtehaan le rahe the.. am yet to receive Gillette Fusion & Wella Kolestint Samples..
  10. 1 point
    Finally - y'day it got connected and Radio started What went wrong in the set in first place I had copied the NAM programing from Moto Maxx and then written to Nexus 4G as per discussion with Kalpak Sir - there are many non relevant fields in MAxx moto - to when there is a conflict in NAM parameters the Radio turns Off What i tried Tried Odin in set turned on - Failed because it was not connecting to com port since radio was off Tried Update by keeping Files in SD card and doin in Fast boot mode Tried Fast boot Updating and flashing radio Where i was going wrong I always complained that its not connecting in Download mode - many friends have mentioned it that tnere is no reason it should, i was putting in DL mode by Vol up + down and very long holding Power Infact its Up + down and Power for just 2-3 sec - when i did this bingo i went in DL mode then ODIN in DL mode worked and since i had messed up NAM i had checked: Phone EFS clear (thanks to Kalpak sir) this clears all NAM to factory Thank you Section phonegeek for link for files Vinod Nayak for pointing and repointing and again repointing that i am doing wrong DL mode digitalnirvana For Staying there and boosting me plus international repair source rajanmehta for finding and sending required files and - supporting me offline too kshah for clearing phone NAm and Explaining me Hemdall and PIT http://www.glassechidna.com.au/ dkaile for keeping and alternate ready ammar52 for reminding ans rereminding me of Odin in DL mode ami1 out great lunix geek - with hard to understand ideas AND whome I forgot to mention - a big thanks Lesson to LEARN THERE is always lot to learn solution can be very simple always ask
  11. 1 point
    There will also be live traffic information for major roads in six Indian cities and their surrounding suburbs: Bengaluru, Mumbai, New Delhi, Chennai, Pune and Hyderabad. Atleast for Mumbai i can confirm we are going to see RED most of the time!
  12. 1 point
    WOW! Finally Google launched Voice-guided GPS Navigation in Google Maps for Android in India. Announced in this official VIDEO from Google India..
  13. 1 point
    ^ @ Dipan, I have posted a request at the link provided by you for addition of Bengali language option to Swype. @Avishek, I know you are a fan of Swiftkey. I feel comfortable on Swype as I can type on keyboard without looking at it. If anybody is fast on touch-typing, he will feel comfortable on swype.
  14. 1 point
    Few days back I shared Indian Railway app which can track your WL tickets and give timely updates for status changes besides other usual stuff. Again, I came across this excellent app with which you can book train ticket, save it offline(now you dont have to carry printout of etickets) and all other things. Here it is: Play link Description This application is aimed at enhancing the User Experience on IRCTC. This is NOT an alternate solution for Tatkal bookings. It will not work while IRCTC mobile site is down. Key Features: -Auto Login. -Intelligent Session Timeout detection & Auto retry Login. -Auto Fill Journey details on Book Ticket Form. -Access your Tickets Offline, Never carry a printed E-Ticket again. -Faster page loading, No images are downloaded except when extremely necessary. -Avoids unwanted usage of IRCTC resources, It never create a new session if existing session still valid. -Major IRCTC navigation are redesigned(UI) with latest Android ICS design patterns. -Designed in multi-threaded architecture to utilize multi core processors. -YOU CAN USE ANY DEBIT CARD FOR THE PAYMENT. (Choose "Other Bank Master/Visa Debit Card" option at payment page.) Limitations: -The application’s Online functionalities are highly depends on IRCTC mobile web page(www.irctc.co.in/mobile), and it will not work if mobile webpage is down. -Journey date will not be listed in Offline Tickets as IRCTC not included it in the Ticket Details of mobile web page. PS : IRCTC does not have any official Android app, all it has a mobile website which rarely works.
  15. 1 point
    @Rahulsid Congrats for your P&G samples. @Deepak I too didn't received Golden Tea sample. @Ayza_cool Cool man cool........Sabr ka phal meetha hota hai.
  16. 1 point
    Thanks for appreciation. I am doing because it gives me happiness. I too learn something from this type of help and I have always taken such incidences as opportunity to learn. BTW what I did was changed SID / NID pairs and Primary and secondary channels. Unfortunately Palm Treo do not give access to these parameters. Its easy to change all these parameters in PPC.
×